EUVIMEDEUVIMED entdecken
Crossref

Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors

Simon A Agnew, Anand P Tiwari, Samuel W Ong, Md Saifur Rahman, William J Scheideler iD

Small · 2024-11 · 20 (45)

DOI: 10.1002/smll.202403801 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 25.07.2024. Verfasst von Simon A Agnew und 4 weiteren Autor:innen. Beteiligte Einrichtung: Thayer School of Engineering, Dartmouth College, Hanover, NH, 03755, USA. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: National Science Foundation (Directorate for Mathematical and Physical Sciences).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

2D native surface oxides formed on low melting temperature metals such as indium and gallium offer unique opportunities for fabricating high‐performance flexible electronics and optoelectronics based on a new class of liquid metal printing (LMP). An inherent property of these Cabrera‐Mott 2D oxides is their suboxide nature (e.g., In 2 O 3−x ), which leads high mobility LMP semiconductors to exhibit high electron concentrations (n e > 10 19 cm −3 ) limiting electrostatic control. Binary alloying of the molten precursor can produce doped, ternary metal oxides such as In‐X‐O with enhanced electronic performance and greater bias‐stress stability, though this approach demands a deeper understanding of the native oxides of alloys. This work presents an approach for hypoeutectic rapid LMP of crystalline InGaO x (IGO) at ultralow process temperatures (180 °C) beyond the state of the art to fabricate transistors with 10X steeper subthreshold slope and high mobility (≈18 cm 2 Vs −1 ). Detailed characterization of IGO crystallinity, composition, and morphology, as well as measurements of its electronic density of states (DOS), show the impact of Ga‐doping and reveal the limits of doping induced amorphization from hypoeutectic precursors. The ultralow process temperatures and compatibility with high‐k Al 2 O 3 dielectrics shown here indicate potential for 2D IGO to drive low‐power flexible transparent electronics.

Schlagwörter

Stichwörter der Autor:innen

2D oxidesflexible transistorsliquid metalsthin film transistorstransparent electronics

Autor:innen und Institutionen

  • Thayer School of Engineering, Dartmouth College, Hanover, NH, 03755, USA.

ORCID-Profile: William J Scheideler

Förderung

  • National Science Foundation (Directorate for Mathematical and Physical Sciences)

Zitieren

APA

Agnew, S. A., Tiwari, A. P., Ong, S. W., Rahman, M. S., & Scheideler, W. J. (2024). Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors. Small, 20(45). https://doi.org/10.1002/smll.202403801

Vancouver

Agnew SA, Tiwari AP, Ong SW, Rahman MS, Scheideler WJ. Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors. Small. 2024;20(45). doi:10.1002/smll.202403801

BibTeX
@article{Agnew2024,
  author = {Agnew, Simon A and Tiwari, Anand P and Ong, Samuel W and Rahman, Md Saifur and Scheideler, William J},
  title = {Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors},
  journal = {Small},
  year = {2024},
  volume = {20},
  number = {45},
  doi = {10.1002/smll.202403801}
}
Kostenlos starten →