Interfacial Dipole Engineering for Energy Level Alignment in NiOx‐Based Quantum Dot Light‐Emitting Diodes
Small · 2024-12 · 20 (49)
DOI: 10.1002/smll.202403325 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 23.09.2024. Verfasst von Shuai-Hao Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University, S…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, Undergraduate Training Program for Innovation and Entrepreneurship of Soochow University.
Abstract (Originalsprache)
The solution‐derived non‐stoichiometric nickel oxide (NiO x ) is a promising hole‐injecting material for stable quantum dot light‐emitting diodes (QLEDs). However, the carrier imbalance due to the misalignment of energy levels between the NiO x and polymeric hole‐transporting layers (HTLs) curtails the device efficiency. In this study, the modification of the NiO x surface is investigated using either 3‐cyanobenzoic acid (3‐CN‐BA) or 4‐cyanobenzoic acid (4‐CN‐BA) in the QLED fabrication. Morphological and electrical analyses revealed that both 4‐CN‐BA and 3‐CN‐BA can enhance the work function of NiO x , reduce the oxygen vacancies on the NiO x surface, and facilitate a uniform morphology for subsequent HTL layers. Moreover, it is found that the binding configurations of dipole molecules as a function of the substitution position of the tail group significantly impact the work function of underlying layers. When integrated in QLEDs, the modification layers resulted in a significant improvement in the electroluminescent efficiency due to the enhancement of energy level alignment and charge balance within the devices. Specifically, QLEDs incorporating 4‐CN‐BA achieved a champion external quantum efficiency (EQE) of 20.34%, which is a 1.8X improvement in comparison with that of the devices utilizing unmodified NiO x (7.28%). Moreover, QLEDs with 4‐CN‐BA and 3‐CN‐BA modifications exhibited prolonged operational lifetimes, indicating potential for practical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University, Suzhou, Jiangsu, 215123, China.
ORCID-Profile: Dong-Ying Zhou
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- Undergraduate Training Program for Innovation and Entrepreneurship of Soochow University
Zitieren
APA
Xu, S. H., Xu, J. Z., Tang, Y. B., Liu, W. Z., Meng, S. G., Zhou, D. Y., & Liao, L. S. (2024). Interfacial Dipole Engineering for Energy Level Alignment in NiOx‐Based Quantum Dot Light‐Emitting Diodes. Small, 20(49). https://doi.org/10.1002/smll.202403325
Vancouver
Xu SH, Xu JZ, Tang YB, Liu WZ, Meng SG, Zhou DY, et al. Interfacial Dipole Engineering for Energy Level Alignment in NiOx‐Based Quantum Dot Light‐Emitting Diodes. Small. 2024;20(49). doi:10.1002/smll.202403325
BibTeX
@article{Xu2024,
author = {Xu, Shuai-Hao and Xu, Jin-Zhe and Tang, Ying-Bo and Liu, Wei-Zhi and Meng, Shu-Guang and Zhou, Dong-Ying and Liao, Liang-Sheng},
title = {Interfacial Dipole Engineering for Energy Level Alignment in NiOx‐Based Quantum Dot Light‐Emitting Diodes},
journal = {Small},
year = {2024},
volume = {20},
number = {49},
doi = {10.1002/smll.202403325}
}
EUVIMED