Utilization of Additive Manufacturing Techniques for the Development of a Novel Scaffolds with Magnetic Properties for Potential Application in Enhanced Bone Regeneration
Small · 2024-11 · 20 (44)
DOI: 10.1002/smll.202402419 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 14.07.2024. Verfasst von Yeison Alejandro Orozco-Osorio und 10 weiteren Autor:innen. Beteiligte Einrichtung: Universidad Nacional de Colombia sede Medellín, Carrera 65 # 59A-100, Medellin, Antioquia, 050034, Colombia. Hauptthemen laut MEDLINE: Bone Regeneration, Tissue Scaffolds, Printing, Three-Dimensional. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 83 Literaturangaben. Gefördert von: Project Hermes 53992. SEGUNDA CONVOCATORIA CONJUNTA DE PROYECTOS DE I+D+i EN EL MARCODE LA AGENDA REGIONAL DE I+D → i.
Abstract (Originalsprache)
This study focuses on designing and evaluating scaffolds with essential properties for bone regeneration, such as biocompatibility, macroporous geometry, mechanical strength, and magnetic responsiveness. The scaffolds are made using 3D printing with acrylic resin and iron oxides synthesized through solution combustion. Utilizing triply periodic minimal surfaces (TPMS) geometry and mask stereolithography (MSLA) printing, the scaffolds achieve precise geometrical features. The mechanical properties are enhanced through resin curing, and magnetite particles from synthesized nanoparticles and alluvial magnetite are added for magnetic properties. The scaffolds show a balance between stiffness, porosity, and magnetic responsiveness, with maximum compression strength between 4.8 and 9.2 MPa and Young's modulus between 58 and 174 MPa. Magnetic properties such as magnetic coercivity, remanence, and saturation are measured, with the best results from scaffolds containing synthetic iron oxides at 1% weight. The viscosity of the mixtures used for printing is between 350 and 380 mPas, and contact angles between 90° and 110° are achieved. Biocompatibility tests indicate the potential for clinical trials, though further research is needed to understand the impact of magnetic properties on cellular interactions and optimize scaffold design for specific applications. This integrated approach offers a promising avenue for the development of advanced materials capable of promoting enhanced bone regeneration.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Universidad Nacional de Colombia sede Medellín, Carrera 65 # 59A-100, Medellin, Antioquia, 050034, Colombia.
- Universidad de Antioquia, Calle 70 # 52-21, 1226, Medellín, 050010, Colombia.
- Instituto Tecnológico Metropolitano, Calle 73 #76A-354, Campus Robledo, Medellín, Antioquia, 50034, Colombia.
- New Stetic, Cra. 53 #50-09, Guarne, Antioquia, 054050, Colombia.
- Universidad de los Andes, Bogotá, Colombia.
- Grupo de Nanoestructuras y Física Aplicada (NANOUPAR), Universidad Nacional de Colombia, La Paz, 202017, Colombia.
ORCID-Profile: Yeison Alejandro Orozco-Osorio, Claudia García
Förderung
- Project Hermes 53992. SEGUNDA CONVOCATORIA CONJUNTA DE PROYECTOS DE I+D+i EN EL MARCODE LA AGENDA REGIONAL DE I+D → i
Zitieren
APA
Orozco-Osorio, Y. A., Gaita-Anturi, A. V., Ossa-Orozco, C. P., Arias-Acevedo, M., Uribe, D., Paucar, C., Vasquez, A. F., Saldarriaga, W., Ramirez, J. G., Lopera, A., & García, C. (2024). Utilization of Additive Manufacturing Techniques for the Development of a Novel Scaffolds with Magnetic Properties for Potential Application in Enhanced Bone Regeneration. Small, 20(44). https://doi.org/10.1002/smll.202402419
Vancouver
Orozco-Osorio YA, Gaita-Anturi AV, Ossa-Orozco CP, Arias-Acevedo M, Uribe D, Paucar C, et al. Utilization of Additive Manufacturing Techniques for the Development of a Novel Scaffolds with Magnetic Properties for Potential Application in Enhanced Bone Regeneration. Small. 2024;20(44). doi:10.1002/smll.202402419
BibTeX
@article{OrozcoOsorio2024,
author = {Orozco-Osorio, Yeison Alejandro and Gaita-Anturi, Angela Victoria and Ossa-Orozco, Claudia Patricia and Arias-Acevedo, María and Uribe, Diego and Paucar, Carlos and Vasquez, Andres Felipe and Saldarriaga, Wilmer and Ramirez, Juan Gabriel and Lopera, Alex and García, Claudia},
title = {Utilization of Additive Manufacturing Techniques for the Development of a Novel Scaffolds with Magnetic Properties for Potential Application in Enhanced Bone Regeneration},
journal = {Small},
year = {2024},
volume = {20},
number = {44},
doi = {10.1002/smll.202402419}
}
EUVIMED