EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

On the Resolution Limit of Electrohydrodynamic Redox 3D Printing

Maxence Menétrey, Cédric Kupferschmid, Stephan Gerstl iD, Ralph Spolenak iD

Small · 2024-11 · 20 (46)

DOI: 10.1002/smll.202402067 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 02.08.2024. Verfasst von Maxence Menétrey und 3 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Nanometallurgy, Department of Materials, ETH Zürich, Vladimir-Prelog-Weg 1-5/10, Zürich, 8093, Switzerland. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) will empower the next breakthroughs in nanotechnology by combining unmatched geometrical freedom with nanometric resolution. Despite recent advances, no micro‐AM technique has been able to synthesize functional nanostructures with excellent metal quality and sub‐100 nm resolution. Here, significant breakthroughs in electrohydrodynamic redox 3D printing (EHD‐RP) are reported by directly fabricating high‐purity Cu (>98 at.%) with adjustable voxel size from >6µm down to 50 nm. This unique tunability of the feature size is achieved by managing in‐flight solvent evaporation of the ion‐loaded droplet to either trigger or prevent the Coulomb explosion. In the first case, the landing of confined droplets on the substrate allows the fabrication of high‐aspect‐ratio 50 nm‐wide nanopillars, while in the second, droplet disintegration leads to large‐area spray deposition. It is discussed that the reported pillar width corresponds to the ultimate resolution achievable by EHD printing. The unrivaled feature size and growth rate (>100 voxel s –1 ) enable the direct manufacturing of 30 µm‐tall atom probe tomography (APT) tips that unveil the pristine microstructure and chemistry of the deposit. This method opens up prospects for the development of novel materials for 3D nano‐printing.

Schlagwörter

Stichwörter der Autor:innen

Coulomb explosionatom probe tomographyelectrodynamic redox 3D printingnano 3D printing

Autor:innen und Institutionen

  • Laboratory for Nanometallurgy, Department of Materials, ETH Zürich, Vladimir-Prelog-Weg 1-5/10, Zürich, 8093, Switzerland.
  • Scientific Center for Optical and Electron Microscopy (ScopeM), ETH Zürich, Otto-Stern-Weg 3, Zürich 8093, Switzerland.

ORCID-Profile: Stephan Gerstl, Ralph Spolenak

Förderung

  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung

Zitieren

APA

Menétrey, M., Kupferschmid, C., Gerstl, S., & Spolenak, R. (2024). On the Resolution Limit of Electrohydrodynamic Redox 3D Printing. Small, 20(46). https://doi.org/10.1002/smll.202402067

Vancouver

Menétrey M, Kupferschmid C, Gerstl S, Spolenak R. On the Resolution Limit of Electrohydrodynamic Redox 3D Printing. Small. 2024;20(46). doi:10.1002/smll.202402067

BibTeX
@article{Mentrey2024,
  author = {Menétrey, Maxence and Kupferschmid, Cédric and Gerstl, Stephan and Spolenak, Ralph},
  title = {On the Resolution Limit of Electrohydrodynamic Redox 3D Printing},
  journal = {Small},
  year = {2024},
  volume = {20},
  number = {46},
  doi = {10.1002/smll.202402067}
}
Kostenlos starten →