Why is Superlubricity of Diamond‐Like Carbon Rare at Nanoscale?
Small · 2024-08 · 20 (33)
DOI: 10.1002/smll.202400513 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 28.03.2024. Verfasst von Seokhoon Jang und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering and Materials Research Institute, Pennsylvania State University, University Park, PA, 16802, USA. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Science Foundation.
Abstract (Originalsprache)
Hydrogenated diamond‐like carbon (HDLC) is a promising solid lubricant for its superlubricity which can benefit various industrial applications. While HDLC exhibits notable friction reduction in macroscale tests in inert or reducing environmental conditions, ultralow friction is rarely observed at the nanoscale. This study investigates this rather peculiar dependence of HDLC superlubricity on the contact scale. To attain superlubricity, HDLC requires i) removal of ≈2 nm‐thick air‐oxidized surface layer and ii) shear‐induced transformation of amorphous carbon to highly graphitic and hydrogenated structure. The nanoscale wear depth exceeds the typical thickness of the air‐oxidized layer, ruling out the possibility of incomplete removal of the air‐oxidized layer. Raman analysis of transfer films indicates that shear‐induced graphitization readily occurs at shear stresses lower than or comparable to those in the nanoscale test. Thus, the same is expected to occur at the nanoscale test. However, the graphitic transfer films are not detected in ex‐situ analyses after nanoscale friction tests, indicating that the graphitic transfer films are pushed out of the nanoscale contact area due to the instability of transfer films within a small contact area. Combining all these observations, this study concludes the retention of highly graphitic transfer films is crucial to achieving HDLC superlubricity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering and Materials Research Institute, Pennsylvania State University, University Park, PA, 16802, USA.
- Department of Physics, St. Olaf College, Northfield, MN, 55057, USA.
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China.
- State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou, 310027, China.
ORCID-Profile: Seokhoon Jang, Zhe Chen, Brian P Borovsky, Seong H Kim
Förderung
- National Science Foundation
Zitieren
APA
Jang, S., Colliton, A. G., Flaih, H. S., Irgens, E. M. K., Kramarczuk, L. J., Rauber, G. D., Vickers, J., Ogrinc, A. L., Zhang, Z., Gong, Z., Chen, Z., Borovsky, B. P., & Kim, S. H. (2024). Why is Superlubricity of Diamond‐Like Carbon Rare at Nanoscale?. Small, 20(33). https://doi.org/10.1002/smll.202400513
Vancouver
Jang S, Colliton AG, Flaih HS, Irgens EMK, Kramarczuk LJ, Rauber GD, et al. Why is Superlubricity of Diamond‐Like Carbon Rare at Nanoscale?. Small. 2024;20(33). doi:10.1002/smll.202400513
BibTeX
@article{Jang2024,
author = {Jang, Seokhoon and Colliton, Ana G and Flaih, Hind S and Irgens, Eskil M K and Kramarczuk, Lucas J and Rauber, Griffin D and Vickers, Jordan and Ogrinc, Andrew L and Zhang, Zhenxi and Gong, Zhenbin and Chen, Zhe and Borovsky, Brian P and Kim, Seong H},
title = {Why is Superlubricity of Diamond‐Like Carbon Rare at Nanoscale?},
journal = {Small},
year = {2024},
volume = {20},
number = {33},
doi = {10.1002/smll.202400513}
}
EUVIMED