EUVIMEDEUVIMED entdecken
Crossref

An Ultrathin Composite Polymer Electrolyte Dual‐Reinforced by a Polymer of Intrinsic Microporosity (PIM‐1) and Poly(tetrafluoroethylene) (PTFE) Porous Membrane

Qian Liang, Xuezhi Liu, Junyan Tang, Xiao Yan, Lei He, En Chen, Sihan Wu, Junjie Liu, Mi Tang, Zhiquan Chen, Zhengbang Wang iD

Small · 2024-05 · 20 (22)

DOI: 10.1002/smll.202306994 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 15.12.2023. Verfasst von Qian Liang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, Co…. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Department of Science and Technology of Hubei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performances of solid‐state polymer electrolytes are urgently required to be further improved for high energy density lithium metal batteries. Herein, a highly reinforced ultrathin composite polymer electrolyte (PLPP) is successfully fabricated in a large scale by densely filling the well‐dispersed mixture of polyethylene oxide (PEO), Li‐salt (LiTFSI) and a polymer of intrinsic microporosity (PIM‐1) into porous poly(tetrafluoroethylene) (PTFE) matrix. Based on the macro‐plus‐micro synergistic enhancement of the PTFE with excellent mechanical properties and the soluble PIM‐1 with suitable functional groups, the PLPP electrolyte exhibits excellent properties including mechanical stress, thermal stability, lithium‐ion transference number, voltage window and ionic conductivity, which are all superior to the typical PEO/LiTFSI electrolytes. As a result, the Li/PLPP/Li symmetric cell can stably cycle for > 2000 h, and the LiFePO 4 /PLPP/Li full cell exhibits excellent rate performance (>10 C) and high cycling stability with an initial capacity of 158.8 mAh g −1 and a capacity retention of 78.8% after 300 cycles. In addition, the excellent mechanical properties as well as the wide voltage window reasonably result in the stable operation of full cells with either high‐loading cathode up to 28.1 mg cm −2 or high voltage cathode with high energy density.

Schlagwörter

Stichwörter der Autor:innen

high voltage cathodehigh‐loading cathodelarge‐scale preparationsynergistic enhancementultrathin electrolytes

Autor:innen und Institutionen

  • Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, Collaborative Innovation Center for Advanced Organic Chemical Materials…
  • Hubei Key Laboratory of Nuclear Solid State Physics, School of Physics and Technology, Wuhan University, Wuhan, 430072, China.

ORCID-Profile: Zhengbang Wang

Förderung

  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation
  • Department of Science and Technology of Hubei Province
  • Overseas Expertise Introduction Center for Discipline Innovation of Food Nutrition and Human Health (111 Center)

Zitieren

APA

Liang, Q., Liu, X., Tang, J., Yan, X., He, L., Chen, E., Wu, S., Liu, J., Tang, M., Chen, Z., & Wang, Z. (2024). An Ultrathin Composite Polymer Electrolyte Dual‐Reinforced by a Polymer of Intrinsic Microporosity (PIM‐1) and Poly(tetrafluoroethylene) (PTFE) Porous Membrane. Small, 20(22). https://doi.org/10.1002/smll.202306994

Vancouver

Liang Q, Liu X, Tang J, Yan X, He L, Chen E, et al. An Ultrathin Composite Polymer Electrolyte Dual‐Reinforced by a Polymer of Intrinsic Microporosity (PIM‐1) and Poly(tetrafluoroethylene) (PTFE) Porous Membrane. Small. 2024;20(22). doi:10.1002/smll.202306994

BibTeX
@article{Liang2024,
  author = {Liang, Qian and Liu, Xuezhi and Tang, Junyan and Yan, Xiao and He, Lei and Chen, En and Wu, Sihan and Liu, Junjie and Tang, Mi and Chen, Zhiquan and Wang, Zhengbang},
  title = {An Ultrathin Composite Polymer Electrolyte Dual‐Reinforced by a Polymer of Intrinsic Microporosity (PIM‐1) and Poly(tetrafluoroethylene) (PTFE) Porous Membrane},
  journal = {Small},
  year = {2024},
  volume = {20},
  number = {22},
  doi = {10.1002/smll.202306994}
}
Kostenlos starten →