Two‐Photon Direct Laser Writing of 3D Scaffolds through C, H‐Insertion Crosslinking in a One‐Component Material System
Small · 2024-04 · 20 (17)
DOI: 10.1002/smll.202306682 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 07.12.2023. Verfasst von Dan Song und 5 weiteren Autor:innen. Beteiligte Einrichtung: Cluster of Excellence livMatS @ FIT-Freiburg Center of Interactive Materials and Bioinspired Technologies, University of Freiburg, Georges-Köhler-All…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: European Research Council, Deutsche Forschungsgemeinschaft, Carl-Zeiss-Stiftung.
Abstract (Originalsprache)
The popularity of two‐photon direct laser writing in biological research is remarkable as this technique is capable of 3D fabrication of microstructures with unprecedented control, flexibility and precision. Nevertheless, potential impurities such as residual monomers and photoinitiators remaining unnoticed from the photopolymerization in the structures pose strong challenges for biological applications. Here, the first use of high‐precision 3D microstructures fabricated from a one‐component material system (without monomers and photoinitiators) as a 3D cell culture platform is demonstrated. The material system consists of prepolymers with built‐ in crosslinker motieties, requiring only aliphatic C, H units as reaction partners following two‐photon excitation. The material is written by direct laser writing using two‐photon processes in a solvent‐free state, which enables the generation of structures at a rapid scan speed of up to 500 mm s −1 with feature sizes scaling down to few micrometers. The generated structures possess stiffnesses close to those of common tissue and demonstrate excellent biocompatibility and cellular adhesion without any additional modification. The demonstrated approach holds great promise for fabricating high‐precision complex 3D cell culture scaffolds that are safe in biological environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Cluster of Excellence livMatS @ FIT-Freiburg Center of Interactive Materials and Bioinspired Technologies, University of Freiburg, Georges-Köhler-Allee 105, 79110, Freiburg, Germany.
- Laboratory of Chemistry & Physics of Interfaces (CPI), Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges-Köhler-Allee 103, 79110, Freiburg, Germany.
- Division of Oral Biotechnology, University Medical Center Freiburg, Faculty of Medicine, University of Freiburg, Hugstetter Str. 55, 79106, Freiburg, Germany.
- Laboratory of Process Technology (NeptunLab), Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges-Köhler-Allee 103, 79110, Freiburg, Germany.
ORCID-Profile: Dan Song, Frederik Kotz-Helmer, Bastian E Rapp, Jürgen Rühe
Förderung
- European Research Council
- Deutsche Forschungsgemeinschaft
- Carl-Zeiss-Stiftung
- H2020 European Research Council
Zitieren
APA
Song, D., Husari, A., Kotz-Helmer, F., Tomakidi, P., Rapp, B. E., & Rühe, J. (2024). Two‐Photon Direct Laser Writing of 3D Scaffolds through C, H‐Insertion Crosslinking in a One‐Component Material System. Small, 20(17). https://doi.org/10.1002/smll.202306682
Vancouver
Song D, Husari A, Kotz-Helmer F, Tomakidi P, Rapp BE, Rühe J. Two‐Photon Direct Laser Writing of 3D Scaffolds through C, H‐Insertion Crosslinking in a One‐Component Material System. Small. 2024;20(17). doi:10.1002/smll.202306682
BibTeX
@article{Song2024,
author = {Song, Dan and Husari, Ayman and Kotz-Helmer, Frederik and Tomakidi, Pascal and Rapp, Bastian E and Rühe, Jürgen},
title = {Two‐Photon Direct Laser Writing of 3D Scaffolds through C, H‐Insertion Crosslinking in a One‐Component Material System},
journal = {Small},
year = {2024},
volume = {20},
number = {17},
doi = {10.1002/smll.202306682}
}
EUVIMED