EUVIMEDEUVIMED entdecken
Crossref

Grafting a Polymer Coating Layer onto Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 Cathode by Benzene Diazonium Salts to Facilitate the Cycling Performance and High‐Voltage Stability

Junhao Liu, Fangkun Li, Lei Xi, Zhaoyu Sun, Yan Yang, Jiadong Shen, Shiyan Yao, Jingwei Zhao, Min Zhu, Jun Liu iD

Small · 2024-01 · 20 (2)

DOI: 10.1002/smll.202305606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 05.09.2023. Verfasst von Junhao Liu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, School of Materials Science and Engineering, South China University of Tech…. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Guangdong Basic and Applied Basic Research Foundation, R&D Program in Key Areas of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Li‐rich Mn‐based cathodes have been regarded as promising cathodes for lithium‐ion batteries because of their low cost of raw materials (compared with Ni‐rich layer structure and LiCoO 2 cathodes) and high energy density. However, for practical application, it needs to solve the great drawbacks of Li‐rich Mn‐based cathodes like capacity degradation and operating voltage decline. Herein, an effective method of surface modification by benzene diazonium salts to build a stable interface between the cathode materials and the electrolyte is proposed. The cathodes after modification exhibit excellent cycling performance (the retention of specific capacity is 84.2% after 350 cycles at the current density of 1 C), which is mainly attributed to the better stability of the structure and interface. This work provides a novel way to design the coating layer with benzene diazonium salts for enhancing the structural stability under high voltage condition during cycling.

Schlagwörter

Stichwörter der Autor:innen

Li-rich Mn-based cathodesbenzene diazonium saltsin situ XRDlithium-ion batteries

Autor:innen und Institutionen

  • Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, China.
  • Research and Development Center, Guangzhou Tinci Materials Technology Co., Ltd., Guangzhou, 510765, China.

ORCID-Profile: Jun Liu

Förderung

  • National Key Research and Development Program of China
  • Guangdong Basic and Applied Basic Research Foundation
  • R&D Program in Key Areas of Guangdong Province
  • National Natural Science Foundation of China

Zitieren

APA

Liu, J., Li, F., Xi, L., Sun, Z., Yang, Y., Shen, J., Yao, S., Zhao, J., Zhu, M., & Liu, J. (2024). Grafting a Polymer Coating Layer onto Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 Cathode by Benzene Diazonium Salts to Facilitate the Cycling Performance and High‐Voltage Stability. Small, 20(2). https://doi.org/10.1002/smll.202305606

Vancouver

Liu J, Li F, Xi L, Sun Z, Yang Y, Shen J, et al. Grafting a Polymer Coating Layer onto Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 Cathode by Benzene Diazonium Salts to Facilitate the Cycling Performance and High‐Voltage Stability. Small. 2024;20(2). doi:10.1002/smll.202305606

BibTeX
@article{Liu2024,
  author = {Liu, Junhao and Li, Fangkun and Xi, Lei and Sun, Zhaoyu and Yang, Yan and Shen, Jiadong and Yao, Shiyan and Zhao, Jingwei and Zhu, Min and Liu, Jun},
  title = {Grafting a Polymer Coating Layer onto Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 Cathode by Benzene Diazonium Salts to Facilitate the Cycling Performance and High‐Voltage Stability},
  journal = {Small},
  year = {2024},
  volume = {20},
  number = {2},
  doi = {10.1002/smll.202305606}
}
Kostenlos starten →