Defensive and Ion Conductive Surface Layer Enables High Rate and Durable O3‐type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Sodium‐Ion Battery Cathode
Small · 2024-01 · 20 (2)
DOI: 10.1002/smll.202305019 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 03.09.2023. Verfasst von Liling Dai und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, 315211, P. R. China. Die Arbeit wurde bisher 103-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: Natural Science Foundation of Zhejiang Province, Zhejiang Provincial Key Program of Research & Studies, Ningbo Science & Technology Innovation 2025 Major Project.
Abstract (Originalsprache)
Na‐based layered transition metal oxides with an O3‐type structure are considered promising cathodes for sodium‐ion batteries. However, rapid capacity fading, and poor rate performance caused by serious structural changes and interfacial degradation hamper their use. In this study, a NaPO 3 surface modified O3‐type layered NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode is synthesized, with improved high‐voltage stability through protecting layer against acid attack, which is achieved by a solid‐gas reaction between the cathode particles and gaseous P 2 O 5 . The NaPO 3 nanolayer on the surface effectively stabilizes the crystal structure by inhibiting surface parasitic reactions and increasing the observed average voltage. Superior cyclic stability is exhibited by the surface‐modified cathode (80.1% vs 63.6%) after 150 cycles at 1 C in the wide voltage range of 2.0 V–4.2 V (vs Na + /Na). Moreover, benefiting from the inherent ionic conduction of NaPO 3 , the surface‐modified cathode presents excellent rate capability (103 mAh g −1 vs 60 mAh g −1 ) at 10 C. The outcome of this study demonstrates a practically relevant approach to develop high rate and durable sodium‐ion battery technology.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, 315211, P. R. China.
- Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315211, P. R. China.
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100049, P. R. China.
ORCID-Profile: Ya-Jun Cheng
Förderung
- Natural Science Foundation of Zhejiang Province
- Zhejiang Provincial Key Program of Research & Studies
- Ningbo Science & Technology Innovation 2025 Major Project
- Key Laboratory of Bio-based Polymeric Materials of Zhejiang Province
Zitieren
APA
Dai, L., Guo, Z., Wang, Z., Xu, S., Wang, S., Li, W., Zhang, G., Cheng, Y. J., & Xia, Y. (2024). Defensive and Ion Conductive Surface Layer Enables High Rate and Durable O3‐type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Sodium‐Ion Battery Cathode. Small, 20(2). https://doi.org/10.1002/smll.202305019
Vancouver
Dai L, Guo Z, Wang Z, Xu S, Wang S, Li W, et al. Defensive and Ion Conductive Surface Layer Enables High Rate and Durable O3‐type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Sodium‐Ion Battery Cathode. Small. 2024;20(2). doi:10.1002/smll.202305019
BibTeX
@article{Dai2024,
author = {Dai, Liling and Guo, Ziyin and Wang, Zhao and Xu, Shunjie and Wang, Shuilong and Li, Wenlu and Zhang, Guodong and Cheng, Ya-Jun and Xia, Yonggao},
title = {Defensive and Ion Conductive Surface Layer Enables High Rate and Durable O3‐type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Sodium‐Ion Battery Cathode},
journal = {Small},
year = {2024},
volume = {20},
number = {2},
doi = {10.1002/smll.202305019}
}
EUVIMED