EUVIMEDEUVIMED entdecken
Crossref

Sponge‐Like Porous‐Conductive Polymer Coating for Ultrastable Silicon Anodes in Lithium‐Ion Batteries

Yuanyuan Yu iD, Chen Yang, Yan Jiang iD, Jiadeng Zhu, Yingying Zhao, Shuheng Liang, Kaixiang Wang, Yulin Zhou, Yuying Liu, Junhua Zhang, Mengjin Jiang

Small · 2023-11 · 19 (47)

DOI: 10.1002/smll.202303779 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 23.07.2023. Verfasst von Yuanyuan Yu und 10 weiteren Autor:innen. Beteiligte Einrichtung: College of Polymer Science and Engineering, Sichuan University, Chengdu, 610065, China. Die Arbeit wurde bisher 88-mal zitiert (Crossref) und nennt 72 Literaturangaben. Gefördert von: State Key Laboratory of Polymer Materials Engineering.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Urgent calls for reversible cycling performance of silicon (Si) requires an efficient solution to maintain the silicon‐electrolyte interface stable. Herein, a conductive biphenyl‐polyoxadiazole (bPOD) layer is coated on Si particles to enhance the electrochemical process and prolong the cells lifespan. The conformal bPOD coatings are mixed ionicelectronic conductors, which not only inhibit the infinite growth of solid electrolyte interphase (SEI) but also endow electrodes with outstanding ion/electrons transport capacity. The superior 3D porous structure in the continuous phase allows the bPOD layers to act like a sponge to buffer volume variation, resulting in high structural stability. The in situ polymerized bPOD coating and it‐driven thin LiF‐rich SEI layer remarkably improve the lithium storage performance of Si anodes, showing a high reversible specific capacity of 1600 mAh g −1 even after 500 cycles at 1 A g −1 along with excellent rate capacity of over 1500 mAh g −1 at 3 A g −1 . It should be noticed that a long cycle life of 800 cycles with 1065 mAh g −1 at 3 A g −1 can also be achieved with a capacity retention of more than 80%. Therefore, we believe this unique polymer coating design paves the way for the widespread adoption of next‐generation lithium‐ion batteries.

Schlagwörter

Stichwörter der Autor:innen

lithium-ion batteriesmixed ionic-electronic conductorpolymer coatingsilicon anodessolid electrolyte interphases

Autor:innen und Institutionen

  • College of Polymer Science and Engineering, Sichuan University, Chengdu, 610065, China.
  • State Key Laboratory of Polymer Materials Engineering, Chengdu, 610065, China.
  • Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA.
  • Smart Devices and Printed Electronics Foundry, Brewer Science Inc, Springfield, MO, 65806, USA.

ORCID-Profile: Yuanyuan Yu, Yan Jiang

Förderung

  • State Key Laboratory of Polymer Materials Engineering

Zitieren

APA

Yu, Y., Yang, C., Jiang, Y., Zhu, J., Zhao, Y., Liang, S., Wang, K., Zhou, Y., Liu, Y., Zhang, J., & Jiang, M. (2023). Sponge‐Like Porous‐Conductive Polymer Coating for Ultrastable Silicon Anodes in Lithium‐Ion Batteries. Small, 19(47). https://doi.org/10.1002/smll.202303779

Vancouver

Yu Y, Yang C, Jiang Y, Zhu J, Zhao Y, Liang S, et al. Sponge‐Like Porous‐Conductive Polymer Coating for Ultrastable Silicon Anodes in Lithium‐Ion Batteries. Small. 2023;19(47). doi:10.1002/smll.202303779

BibTeX
@article{Yu2023,
  author = {Yu, Yuanyuan and Yang, Chen and Jiang, Yan and Zhu, Jiadeng and Zhao, Yingying and Liang, Shuheng and Wang, Kaixiang and Zhou, Yulin and Liu, Yuying and Zhang, Junhua and Jiang, Mengjin},
  title = {Sponge‐Like Porous‐Conductive Polymer Coating for Ultrastable Silicon Anodes in Lithium‐Ion Batteries},
  journal = {Small},
  year = {2023},
  volume = {19},
  number = {47},
  doi = {10.1002/smll.202303779}
}
Kostenlos starten →