3D‐Printed Piezoelectric Scaffolds with Shape Memory Polymer for Bone Regeneration
Small · 2023
DOI: 10.1002/smll.202302927 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, 2023. Verfasst von Guanlin Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China. Hauptthemen laut MEDLINE: Smart Materials, Metal Nanoparticles. Die Arbeit wurde bisher 64-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Wuhan University of Technology.
Abstract (Originalsprache)
The application of piezoelectric nanoparticles with shape memory polymer (SMP) to 3D‐printed piezoelectric scaffolds for bone defect repair is an attractive research direction. However, there is a significant difference in dielectric constants between the piezoelectric phase and polymer phase, limiting the piezoelectric property. Therefore, novel piezoelectric acrylate epoxidized soybean oil (AESO) scaffolds doped with piezoelectric Ag‐TMSPM‐pBT (ATP) nanoparticles (AESO‐ATP scaffolds) are prepared via digital light procession 3D‐printing. The Ag‐TMSPM‐pBT nanoparticles improve the piezoelectric properties of the AESO scaffolds by TMSPM covalent functionalization and conductive Ag nanoparticles. The AESO scaffolds doped with 10 wt% Ag‐TMSPM‐pBT nanoparticles (AESO‐10ATP scaffolds) exhibit promising piezoelectrical properties, with a piezoelectric coefficient (d33) of 0.9 pC N −1 and an output current of 146.4 nA, which are close to the piezoelectric constants of bone tissue. In addition, these scaffolds exhibit good shape memory function and can quickly recover their original shape under near‐infrared (NIR) light irradiation. The results of osteogenesis capability evaluation indicate that the AESO‐10ATP scaffolds can promote osteogenic differentiation of BMSCs in vitro and bone defect repair in vivo, indicating the 3D‐printed AESO‐10ATP piezoelectric scaffolds may have great application potential for bone regeneration.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China.
- Sanya Science and Education Innovation Park of Wuhan University of Technology, Sanya, 572000, China.
ORCID-Profile: Guanlin Li, Zheng Zhao
Förderung
- National Natural Science Foundation of China
- Wuhan University of Technology
Zitieren
APA
Li, G., Li, Z., Min, Y., Chen, S., Han, R., & Zhao, Z. (2023). 3D‐Printed Piezoelectric Scaffolds with Shape Memory Polymer for Bone Regeneration. Small. https://doi.org/10.1002/smll.202302927
Vancouver
Li G, Li Z, Min Y, Chen S, Han R, Zhao Z. 3D‐Printed Piezoelectric Scaffolds with Shape Memory Polymer for Bone Regeneration. Small. 2023. doi:10.1002/smll.202302927
BibTeX
@article{Li2023,
author = {Li, Guanlin and Li, Zehao and Min, Yajun and Chen, Shilu and Han, Ruijia and Zhao, Zheng},
title = {3D‐Printed Piezoelectric Scaffolds with Shape Memory Polymer for Bone Regeneration},
journal = {Small},
year = {2023},
doi = {10.1002/smll.202302927}
}
EUVIMED