EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Room‐Temperature Li‐Metal Battery Performance by In Situ Creation of Fast Li + Transport Pathways in a Polymer‐Ceramic Electrolyte

Jing Yu, Guodong Zhou, Yueqing Li, Yuhao Wang, Dengjie Chen, Francesco Ciucci iD

Small · 2023-09 · 19 (39)

DOI: 10.1002/smll.202302691 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 06.06.2023. Verfasst von Jing Yu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Chemical Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou, 510225, China. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Grants Council of Hong Kong, Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composite polymer‐ceramic electrolytes have shown considerable potential for high‐energy‐density Li‐metal batteries as they combine the benefits of both polymers and ceramics. However, low ionic conductivity and poor contact with electrodes limit their practical usage. In this study, a highly conductive and stable composite electrolyte with a high ceramic loading is developed for high‐energy‐density Li‐metal batteries. The electrolyte, produced through in situ polymerization and composed of a polymer called poly‐1,3‐dioxolane in a poly(vinylidene fluoride)/ceramic matrix, exhibits excellent room‐temperature ionic conductivity of 1.2 mS cm −1 and high stability with Li metal over 1500 h. When tested in a Li|electrolyte|LiFePO 4 battery, the electrolyte delivers excellent cycling performance and rate capability at room temperature, with a discharge capacity of 137 mAh g −1 over 500 cycles at 1 C. Furthermore, the electrolyte not only exhibits a high Li + transference number of 0.76 but also significantly lowers contact resistance (from 157.8 to 2.1 Ω) relative to electrodes. When used in a battery with a high‐voltage LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode, a discharge capacity of 140 mAh g −1 is achieved. These results show the potential of composite polymer‐ceramic electrolytes in room‐temperature solid‐state Li‐metal batteries and provide a strategy for designing highly conductive polymer‐in‐ceramic electrolytes with electrode‐compatible interfaces.

Schlagwörter

Stichwörter der Autor:innen

Li-metal batteriesin situ formationslow interfacial resistivitiespolymer-in-ceramicsolid-state batteries

Autor:innen und Institutionen

  • Department of Chemistry and Chemical Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou, 510225, China.
  • Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Hong Kong, 000000, China.
  • College of Chemistry and Materials Science, Jinan University, Guangzhou, 510632, China.
  • Chair of Electrode Design for Electrochemical Energy Systems, University of Bayreuth, 95447, Bayreuth, Bavaria, Germany.
  • Bavarian Center for Battery Technology (BayBatt), 95447, Bayreuth, Bavaria, Germany.

ORCID-Profile: Francesco Ciucci

Förderung

  • Research Grants Council of Hong Kong
  • Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone

Zitieren

APA

Yu, J., Zhou, G., Li, Y., Wang, Y., Chen, D., & Ciucci, F. (2023). Improving Room‐Temperature Li‐Metal Battery Performance by In Situ Creation of Fast Li + Transport Pathways in a Polymer‐Ceramic Electrolyte. Small, 19(39). https://doi.org/10.1002/smll.202302691

Vancouver

Yu J, Zhou G, Li Y, Wang Y, Chen D, Ciucci F. Improving Room‐Temperature Li‐Metal Battery Performance by In Situ Creation of Fast Li + Transport Pathways in a Polymer‐Ceramic Electrolyte. Small. 2023;19(39). doi:10.1002/smll.202302691

BibTeX
@article{Yu2023,
  author = {Yu, Jing and Zhou, Guodong and Li, Yueqing and Wang, Yuhao and Chen, Dengjie and Ciucci, Francesco},
  title = {Improving Room‐Temperature Li‐Metal Battery Performance by In Situ Creation of Fast Li + Transport Pathways in a Polymer‐Ceramic Electrolyte},
  journal = {Small},
  year = {2023},
  volume = {19},
  number = {39},
  doi = {10.1002/smll.202302691}
}
Kostenlos starten →