EUVIMEDEUVIMED entdecken
Crossref

Defect‐engineered Sulfur Vacancy Modified NiCo 2 S 4‐x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries

Xin Dai, Xu Wang, Guangjun Lv, Zhen Wu, Yan Liu, Junjie Sun, Yongning Liu, Yuanzhen Chen iD

Small · 2023-09 · 19 (36)

DOI: 10.1002/smll.202302267 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, 2023-05. Verfasst von Xin Dai und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, P.R…. Die Arbeit wurde bisher 72-mal zitiert (Crossref) und nennt 61 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Joint Funds of the Natural Science Basic Research Project of Shaanxi Province, University Joint Project of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The low conductivity of sulfur and the shuttle effect of lithium polysulfides (LiPSs) are the two intrinsic obstacles that limit the application of lithium–sulfur batteries (LSBs). Herein, a sulfur vacancy introduced NiCo 2 S 4 nanosheet array grown on carbon nanofiber (CNF) membrane (NiCo 2 S 4‐x /CNF) is proposed to serve as a self‐supporting and binder‐free interlayer in LSBs. The conductive CNF skeleton with a non‐woven structure can effectively reduce the resistance of the cathode and accommodate volume expansion during charge–discharge process. The bonding between CNF matrix and NiCo 2 S 4 nanosheet is enhanced by in situ growth, ensuring fast electron transfer. Besides, the sulfur vacancies in NiCo 2 S 4 enhance the chemisorption of LiPSs, and the highly active sites at vacancies can accelerate the LiPSs conversion kinetics. LSB paired with NiCo 2 S 4‐x /CNF interlayer achieved improved stability in 500 cycles at 0.2 C and long life of 3000 cycles at 3 C. More importantly, a high areal capacity of 9.69 mAh cm −2 is achieved with a sulfur loading of 10.8 mg cm −2 and a low electrolyte to sulfur (E/S) ratio of 4.8. This work provides insight into the sulfur vacancy in catalysis design for LiPSs conversion and demonstrates a promising direction for electronic defect engineering in material design for LSBs.

Schlagwörter

Stichwörter der Autor:innen

catalyticelectronic deficiencylithium-sulfursulfur vacancies

Autor:innen und Institutionen

  • State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an, 710049, P.R. China.

ORCID-Profile: Yuanzhen Chen

Förderung

  • National Natural Science Foundation of China
  • Joint Funds of the Natural Science Basic Research Project of Shaanxi Province
  • University Joint Project of Shaanxi Province
  • Natural Science Foundation of Shaanxi Province

Zitieren

APA

Dai, X., Wang, X., Lv, G., Wu, Z., Liu, Y., Sun, J., Liu, Y., & Chen, Y. (2023). Defect‐engineered Sulfur Vacancy Modified NiCo 2 S 4‐x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries. Small, 19(36). https://doi.org/10.1002/smll.202302267

Vancouver

Dai X, Wang X, Lv G, Wu Z, Liu Y, Sun J, et al. Defect‐engineered Sulfur Vacancy Modified NiCo 2 S 4‐x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries. Small. 2023;19(36). doi:10.1002/smll.202302267

BibTeX
@article{Dai2023,
  author = {Dai, Xin and Wang, Xu and Lv, Guangjun and Wu, Zhen and Liu, Yan and Sun, Junjie and Liu, Yongning and Chen, Yuanzhen},
  title = {Defect‐engineered Sulfur Vacancy Modified NiCo 2 S 4‐x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries},
  journal = {Small},
  year = {2023},
  volume = {19},
  number = {36},
  doi = {10.1002/smll.202302267}
}
Kostenlos starten →