EUVIMEDEUVIMED entdecken
Crossref

Toward Ultrahigh Thermoelectric Performance of Cu 2 SnS 3 ‐Based Materials by Analog Alloying

Wang Li, Yubo Luo, Tian Xu, Zheng Ma, Chengjun Li, Yingchao Wei, Yang Tao, Yongxin Qian, Xin Li, Qinghui Jiang, Junyou Yang iD

Small · 2023-07 · 19 (29)

DOI: 10.1002/smll.202301963 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 13.05.2023. Verfasst von Wang Li und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science …. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu 2 SnS 3 is a promising thermoelectric candidate for power generation at medium temperature due to its low‐cost and environmental‐benign features. However, the high electrical resistivity due to low hole concentration severely restricts its final thermoelectric performance. Here, analog alloying with CuInSe 2 is first adopted to optimize the electrical resistivity by promoting the formation of Sn vacancies and the precipitation of In, and optimize lattice thermal conductivity through the formation of stacking faults and nanotwins. Such analog alloying enables a greatly enhanced power factor of 8.03 µW cm −1 K −2 and a largely reduced lattice thermal conductivity of 0.38 W m −1 K −1 for Cu 2 SnS 3 – 9 mol.% CuInSe 2 . Eventually, a peak ZT as high as 1.14 at 773 K is achieved for Cu 2 SnS 3 – 9 mol.% CuInSe 2 , which is one of the highest ZT among the researches on Cu 2 SnS 3 ‐based thermoelectric materials. The work implies analog alloying with CuInSe 2 is a very effective route to unleash superior thermoelectric performance of Cu 2 SnS 3 .

Schlagwörter

Stichwörter der Autor:innen

Cu2SnS3CuInSe2alloyingthermoelectric

Autor:innen und Institutionen

  • School of Materials Science and Engineering, State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan, 430074, China.

ORCID-Profile: Junyou Yang

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Li, W., Luo, Y., Xu, T., Ma, Z., Li, C., Wei, Y., Tao, Y., Qian, Y., Li, X., Jiang, Q., & Yang, J. (2023). Toward Ultrahigh Thermoelectric Performance of Cu 2 SnS 3 ‐Based Materials by Analog Alloying. Small, 19(29). https://doi.org/10.1002/smll.202301963

Vancouver

Li W, Luo Y, Xu T, Ma Z, Li C, Wei Y, et al. Toward Ultrahigh Thermoelectric Performance of Cu 2 SnS 3 ‐Based Materials by Analog Alloying. Small. 2023;19(29). doi:10.1002/smll.202301963

BibTeX
@article{Li2023,
  author = {Li, Wang and Luo, Yubo and Xu, Tian and Ma, Zheng and Li, Chengjun and Wei, Yingchao and Tao, Yang and Qian, Yongxin and Li, Xin and Jiang, Qinghui and Yang, Junyou},
  title = {Toward Ultrahigh Thermoelectric Performance of Cu 2 SnS 3 ‐Based Materials by Analog Alloying},
  journal = {Small},
  year = {2023},
  volume = {19},
  number = {29},
  doi = {10.1002/smll.202301963}
}
Kostenlos starten →