Niobium‐Carbide MXene Modified Hybrid Hole Transport Layer Enabling High‐Performance Organic Solar Cells Over 19%
Small · 2023-06 · 19 (23)
DOI: 10.1002/smll.202207505 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 08.03.2023. Verfasst von Baozhong Deng und 8 weiteren Autor:innen. Beteiligte Einrichtung: Sino-European School of Technology, Shanghai University, Shanghai, 200444, P. R. China. Die Arbeit wurde bisher 80-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Program for Professor of Special Appointment (Eastern Scholar) at the Shanghai Institutions of Higher Learning and the Shanghai Rising-Star Program.
Abstract (Originalsprache)
Niobium‐carbide (Nb 2 C) MXene as a new 2D material has shown great potential for application in photovoltaics due to its excellent electrical conductivity, large surface area, and superior transmittance. In this work, a novel solution‐processable poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)‐Nb 2 C hybrid hole transport layer (HTL) is developed to enhance the device performance of organic solar cells (OSCs). By optimizing the doping ratio of Nb 2 C MXene in PEDOT:PSS, the best power convention efficiency (PCE) of 19.33% can be achieved for OSCs based on the ternary active layer of PM6:BTP‐eC9:L8‐BO, which is so far the highest value among those of single junction OSCs using 2D materials. It is found that the addition of Nb 2 C MXene can facilitate the phase separation of the PEDOT and PSS segments, thus improving the conductivity and work function of PEDOT:PSS. The significantly enhanced device performance can be attributed to the higher hole mobility and charge extraction capability, as well as lower interface recombination probabilities generated by the hybrid HTL. Additionally, the versatility of the hybrid HTL to improve the performance of OSCs based on different nonfullerene acceptors is demonstrated. These results indicate the promising potential of Nb 2 C MXene in the development of high‐performance OSCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Sino-European School of Technology, Shanghai University, Shanghai, 200444, P. R. China.
- School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, 200444, P. R. China.
- Materials Gerome Institute, Shanghai University, Shanghai, 200444, P. R. China.
- Center for High Pressure Science and Technology Advanced Research, Shanghai, 201203, P. R. China.
ORCID-Profile: Shenghao Wang
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Program for Professor of Special Appointment (Eastern Scholar) at the Shanghai Institutions of Higher Learning and the Shanghai Rising-Star Program
Zitieren
APA
Deng, B., Lian, H., Xue, B., Song, R., Chen, S., Wang, Z., Xu, T., Dong, H., & Wang, S. (2023). Niobium‐Carbide MXene Modified Hybrid Hole Transport Layer Enabling High‐Performance Organic Solar Cells Over 19%. Small, 19(23). https://doi.org/10.1002/smll.202207505
Vancouver
Deng B, Lian H, Xue B, Song R, Chen S, Wang Z, et al. Niobium‐Carbide MXene Modified Hybrid Hole Transport Layer Enabling High‐Performance Organic Solar Cells Over 19%. Small. 2023;19(23). doi:10.1002/smll.202207505
BibTeX
@article{Deng2023,
author = {Deng, Baozhong and Lian, Hong and Xue, Baotong and Song, Ruichen and Chen, Shi and Wang, Zihan and Xu, Tao and Dong, Hongliang and Wang, Shenghao},
title = {Niobium‐Carbide MXene Modified Hybrid Hole Transport Layer Enabling High‐Performance Organic Solar Cells Over 19%},
journal = {Small},
year = {2023},
volume = {19},
number = {23},
doi = {10.1002/smll.202207505}
}
EUVIMED