Fabrication of Highly Vertical TiN Nanopillars by ICP‐RIE Using SF 6 /Ar Plasma
ChemistrySelect · 2026-09 · 11 (34)
DOI: 10.1002/slct.74423 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemistrySelect, online erschienen am 04.09.2026. Verfasst von Zuowei Shi und 7 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
This study investigates the fabrication of TiN nanopillars by inductively coupled plasma reactive ion etching (ICP‐RIE). We systematically compared SF 6 /Ar and CO/Ar gas mixtures to evaluate the effects of gas ratio, chamber pressure, ICP source power, and bias power on TiN's vertical etch rate, lateral etching, and sidewall angle. The results show that in the CO/Ar system, a passivation layer forms via reactions between C/O radicals and TiN, which strongly suppresses etching, leading to extremely low etch rate and poor process controllability, making it unsuitable for TiN patterning. By contrast, the SF 6 /Ar system exhibits high process tunability due to the synergistic interaction between F‐radical chemical etching and Ar + ion physical bombardment. Under optimized conditions (40% SF 6 fraction, 2 Pa chamber pressure, 500 W ICP power, 100 W bias power), an optimal balance between chemical and physical effects is achieved, producing TiN nanopillars with the most vertical sidewalls. Additionally, prolonged etching under these conditions induces an ion “trimming effect” that progressively drives the sidewall angle toward 90°, enabling successful fabrication of high‐quality TiN nanopillar arrays.
Förderung
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Shi, Z., Yang, Y., Gao, Y., Yu, Y., Yang, C., Li, R., Nishioka, K., & Ye, S. (2026). Fabrication of Highly Vertical TiN Nanopillars by ICP‐RIE Using SF 6 /Ar Plasma. ChemistrySelect, 11(34). https://doi.org/10.1002/slct.74423
Vancouver
Shi Z, Yang Y, Gao Y, Yu Y, Yang C, Li R, et al. Fabrication of Highly Vertical TiN Nanopillars by ICP‐RIE Using SF 6 /Ar Plasma. ChemistrySelect. 2026;11(34). doi:10.1002/slct.74423
BibTeX
@article{Shi2026,
author = {Shi, Zuowei and Yang, Yuzhong and Gao, Yu and Yu, Yu and Yang, Chen and Li, Ruixin and Nishioka, Koichi and Ye, Shujun},
title = {Fabrication of Highly Vertical TiN Nanopillars by ICP‐RIE Using SF 6 /Ar Plasma},
journal = {ChemistrySelect},
year = {2026},
volume = {11},
number = {34},
doi = {10.1002/slct.74423}
}
EUVIMED