EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrochemically Fabricated NiP/Cu Electrode for Enhanced Urea Electrooxidation in Alkaline Media

Tolga Karazehir, Baran Sarac, A. Sezai Sarac

ChemistrySelect · 2026-06 · 11 (23)

DOI: 10.1002/slct.73637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemistrySelect, online erschienen am 18.06.2026. Verfasst von Tolga Karazehir und 2 weiteren Autor:innen. Die Arbeit nennt 103 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Galvanostatic preparation of nickel–phosphide (NiP) coatings on Cu substrates by electrodeposition using current densities of 0.5–5 mAcm − 2 is described and their application to the urea oxidation in alkaline media is evaluated. The NiP/5 catalyst showed the highest electrocatalytic performance in 1 M KOH with the presence of 0.33 M urea than all tested electrodes, providing a high current density (5.87 mAm − 2 g) with a higher oxidation potential (0.56 V), which was 1.5‐fold and ∼12‐fold greater than that of Ni and NiP/0.5, respectively. The excellent catalytic performance of NiP/5 can be attributed to synergistic contributions of a fully amorphous structure, phosphorus composition and rough porous surface morphology. The amorphous NiP/5 catalyst presented abundant unsaturated active sites and rapid adsorption/desorption of urea‐related intermediates, whereas the phosphorus incorporation facilitated electronic modulation and rapid in situ formation of electroactive NiOOH species. Electrochemical impedance spectroscopy further confirmed the enhanced charge‐transfer kinetics; with urea addition, the charge‐transfer resistance decreases significantly from 61.32 to 5.28 Ωcm 2 . Chronoamperometric measurements showed that the catalyst was also stable during long‐term electrolysis. These results suggest that using the appropriate current density for electrodeposition is a viable approach to engineering the morphology, composition and electronic structure of amorphous NiP catalysts for efficient urea electrooxidation.

Zitieren

APA

Karazehir, T., Sarac, B., & Sarac, A. S. (2026). Electrochemically Fabricated NiP/Cu Electrode for Enhanced Urea Electrooxidation in Alkaline Media. ChemistrySelect, 11(23). https://doi.org/10.1002/slct.73637

Vancouver

Karazehir T, Sarac B, Sarac AS. Electrochemically Fabricated NiP/Cu Electrode for Enhanced Urea Electrooxidation in Alkaline Media. ChemistrySelect. 2026;11(23). doi:10.1002/slct.73637

BibTeX
@article{Karazehir2026,
  author = {Karazehir, Tolga and Sarac, Baran and Sarac, A. Sezai},
  title = {Electrochemically Fabricated NiP/Cu Electrode for Enhanced Urea Electrooxidation in Alkaline Media},
  journal = {ChemistrySelect},
  year = {2026},
  volume = {11},
  number = {23},
  doi = {10.1002/slct.73637}
}
Kostenlos starten →