27‐2: Development of Lamination Process for High‐Spec Quad‐Curved Modules
SID Symposium Digest of Technical Papers · 2026-08 · 57 (S1) · 243-247
DOI: 10.1002/sdtp.70003_62 ↗Kurz gefasst
Fachartikel in der Zeitschrift SID Symposium Digest of Technical Papers, online erschienen am 11.09.2026. Verfasst von Yang Liu und 6 weiteren Autor:innen. Die Arbeit nennt 4 Literaturangaben.
Abstract (Originalsprache)
To address the bubble issue in the lamination of high‐specification flexible OLED four‐curve modules, a solution to reduce lamination bubble defects is proposed based on the study of lamination fixture design simulation, heated lamination, degassing, and curing processes. Firstly, the optimal PAD design was determined by simulating the stress distribution during module lamination. Secondly, based on the temperature‐dependent modulus of the OCA material, the optimal heated process parameters were verified. Subsequently, using the Design of Experiments (DOE) method, the optimal degassing parameters were identified. Finally, a modification of the curing air knife was introduced to lower the temperature, stabilizing the cohesive force of the OCA material during curing and suppressing bubble rebound caused by temperature rise. Based on these research findings, the bubble defect rate in lamination was significantly reduced from 4.7% to 1.05%, achieving a lamination yield suitable for mass production.
Zitieren
APA
Liu, Y., Wei, Y., Chen, Z., Wang, Z., Zhu, X., Zhang, G., & Yang, J. (2026). 27‐2: Development of Lamination Process for High‐Spec Quad‐Curved Modules. SID Symposium Digest of Technical Papers, 57(S1), 243-247. https://doi.org/10.1002/sdtp.70003_62
Vancouver
Liu Y, Wei Y, Chen Z, Wang Z, Zhu X, Zhang G, et al. 27‐2: Development of Lamination Process for High‐Spec Quad‐Curved Modules. SID Symposium Digest of Technical Papers. 2026;57(S1):243-247. doi:10.1002/sdtp.70003_62
BibTeX
@article{Liu2026,
author = {Liu, Yang and Wei, Yingning and Chen, Ziqian and Wang, Zhiwei and Zhu, Xiaolong and Zhang, Guofeng and Yang, Jinjin},
title = {27‐2: Development of Lamination Process for High‐Spec Quad‐Curved Modules},
journal = {SID Symposium Digest of Technical Papers},
year = {2026},
volume = {57},
number = {S1},
pages = {243--247},
doi = {10.1002/sdtp.70003_62}
}
EUVIMED