EUVIMEDEUVIMED entdecken
Crossref

P‐15.3: An Electrohydrodynamic Inkjet Printing System for Defect Repair

Xiaohan Hu, Hengrong Xu, Zemin Huang, Honglong Ning, Rihui Yao, Wei Xu, Junbiao Peng

SID Symposium Digest of Technical Papers · 2026-08 · 57 (S1) · 2039-2041

DOI: 10.1002/sdtp.70003_548 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SID Symposium Digest of Technical Papers, online erschienen am 11.09.2026. Verfasst von Xiaohan Hu und 6 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rapid development of display technologies toward ultra‐high resolution and flexible form factors, micron‐ and even nanoscale defects generated during the manufacturing process—such as open circuits, electrode discontinuities, and non‐uniform OLED emissive layers—have become critical bottlenecks limiting yield improvement and cost reduction. However, conventional repair techniques are constrained by insufficient resolution and limited material compatibility, making it increasingly difficult to meet the stringent demands of advanced display fabrication. To address these challenges, a high‐precision electrohydro‐dynamic (EHD) inkjet printing system for defect repair is designed and developed in this work. The system integrates a precisely controllable electric‐field module, a microfluidic printing nozzle compatible with multiple functional materials, and a sub‐micron positioning stage. Under a high‐voltage electric field applied at the nozzle tip, a stable Taylor cone is generated, enabling the controllable ejection of ultra‐small functional droplets with volumes from picoliters to femtoliters. Experimental results demonstrate that the printed line width can be precisely regulated within the range of 1–10 μm, which is significantly narrower than that achievable using conventional piezoelectric inkjet printing. Fig. 2 b, c shows the printed drops and lines using NPS‐J silver ink from Harima. The system exhibits a repeatable positioning accuracy of ±1 μm, enabling efficient and accurate localization and repair of various display‐related defects. Specifically, for missing OLED pixels, in‐situ precise filling of emissive materials can be realized, while electrical restoration of metal pattern defects in thin‐film transistor (TFT) arrays is successfully achieved via conductive silver ink printing. The developed EHD inkjet printing system not only provides an efficient and cost‐effective solution for defect repair in display manufacturing, but also demonstrates great potential for advanced electronic device additive manufacturing and direct writing of micro/nano‐scale structures.

Zitieren

APA

Hu, X., Xu, H., Huang, Z., Ning, H., Yao, R., Xu, W., & Peng, J. (2026). P‐15.3: An Electrohydrodynamic Inkjet Printing System for Defect Repair. SID Symposium Digest of Technical Papers, 57(S1), 2039-2041. https://doi.org/10.1002/sdtp.70003_548

Vancouver

Hu X, Xu H, Huang Z, Ning H, Yao R, Xu W, et al. P‐15.3: An Electrohydrodynamic Inkjet Printing System for Defect Repair. SID Symposium Digest of Technical Papers. 2026;57(S1):2039-2041. doi:10.1002/sdtp.70003_548

BibTeX
@article{Hu2026,
  author = {Hu, Xiaohan and Xu, Hengrong and Huang, Zemin and Ning, Honglong and Yao, Rihui and Xu, Wei and Peng, Junbiao},
  title = {P‐15.3: An Electrohydrodynamic Inkjet Printing System for Defect Repair},
  journal = {SID Symposium Digest of Technical Papers},
  year = {2026},
  volume = {57},
  number = {S1},
  pages = {2039--2041},
  doi = {10.1002/sdtp.70003_548}
}
Kostenlos starten →