EUVIMEDEUVIMED entdecken
Crossref

P‐7.14: Formation Process and Solution of N+ Remain Defect in the Channel of Amorphous Silicon TFT

Dan Liu, Zhonghao Huang, Xu Wu, Fei Guan, Guoliang Chen, Rui Wang, Chang Tan, Chao Liu, Taiye Min, Wei Zhao, Lijia Chen, Yue Lin und 2 weitere

SID Symposium Digest of Technical Papers · 2026-08 · 57 (S1) · 1477-1480

DOI: 10.1002/sdtp.70003_394 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SID Symposium Digest of Technical Papers, online erschienen am 11.09.2026. Verfasst von Dan Liu und 13 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To suppress N+ remain in a‐Si dual gate products with 7‐mask, the formation process of this defect has been investigated, and solutions have been developed. First, based on mass‐produced H 2 O 2 etchant, the polarization curves of MoNb and Cu, along with the paired corrosion currents of MoNb/Cu, were measured. Second, the relationship between the N+ remain rate and the Cu ion concentration in the H 2 O 2 etchant was established. Finally, based on the above tests, the N+ remain formation process was determined and a series of solutions were generated employing TRIZ. Experimental results indicate that the corrosion potentials of MoNb and Cu are 0.240 V and 0.334 V respectively. A galvanic cell is formed between MoNb/Cu, with MoNb acting as the anode and losing electrons. The paired corrosion current of the MoNb/Cu system gradually decreased, indicating that MoNb developed a passivation layer that inhibited electrochemical corrosion. The N+ remain rate progressively decreased with increasing Cu ion concentration in the H O etchant. The essence of N+ remain is that during the SD etching process, a passivation layer forms on the MoNb surface, leading to etching residue. This residue subsequently inhibits N+ etching during the N+ etching process, ultimately forming N+ remain. Conducting SD etching at high Cu ion concentrations can be used to reduce MoNb etching residue, thereby ultimately suppressing N+ remain.

Zitieren

APA

Liu, D., Huang, Z., Wu, X., Guan, F., Chen, G., Wang, R., Tan, C., Liu, C., Min, T., Zhao, W., Chen, L., Lin, Y., Zhao, X., & Xie, M. (2026). P‐7.14: Formation Process and Solution of N+ Remain Defect in the Channel of Amorphous Silicon TFT. SID Symposium Digest of Technical Papers, 57(S1), 1477-1480. https://doi.org/10.1002/sdtp.70003_394

Vancouver

Liu D, Huang Z, Wu X, Guan F, Chen G, Wang R, et al. P‐7.14: Formation Process and Solution of N+ Remain Defect in the Channel of Amorphous Silicon TFT. SID Symposium Digest of Technical Papers. 2026;57(S1):1477-1480. doi:10.1002/sdtp.70003_394

BibTeX
@article{Liu2026,
  author = {Liu, Dan and Huang, Zhonghao and Wu, Xu and Guan, Fei and Chen, Guoliang and Wang, Rui and Tan, Chang and Liu, Chao and Min, Taiye and Zhao, Wei and Chen, Lijia and Lin, Yue and Zhao, Xi and Xie, Maowen},
  title = {P‐7.14: Formation Process and Solution of N+ Remain Defect in the Channel of Amorphous Silicon TFT},
  journal = {SID Symposium Digest of Technical Papers},
  year = {2026},
  volume = {57},
  number = {S1},
  pages = {1477--1480},
  doi = {10.1002/sdtp.70003_394}
}
Kostenlos starten →