EUVIMEDEUVIMED entdecken
Crossref

P‐7.3: A study on low resistance gate Cu or Ag for AMOLED

Cai-Yu Qu, Bao-Sheng He, Zun-Qing Song, Dong Li, Liang-Jian Li, Xi-jie Yao, Bing-Wei Wang, Zheng Liu, Wen-Xuan Zhang, Wei-Feng Zhou

SID Symposium Digest of Technical Papers · 2026-08 · 57 (S1) · 1439-1441

DOI: 10.1002/sdtp.70003_383 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SID Symposium Digest of Technical Papers, online erschienen am 11.09.2026. Verfasst von Cai-Yu Qu und 9 weiteren Autor:innen. Die Arbeit nennt 2 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to evaluate the feasibility of Cu and Ag based stacked thin films as low resistance gate materials, a systematic study was conducted on their electrical properties, mechanical properties, oxidation resistance, high‐temperature diffusion resistance, and TFT device integration characteristics. Adopting MTD/Cu/MTD, Mo/Ag/Mo, and ITO/Ag/ITO stacked structures, the resistance change was tested by high‐temperature annealing; Use the hundred grid knife method to evaluate the adhesion of the film layer; Analyze the antioxidant performance through AOI and SEM; Using Tof sims to analyze the diffusion behavior of Cu after high‐temperature annealing; Finally, the Cu gate was integrated into the LTPS TFT process, and its transfer characteristics were compared with those of the traditional Mo gate. After annealing at 350‐450 ℃, the square resistance of MTD/Cu/MTD (300/3000/200 Å) remained stable at 0.064‐0.066 Ω/□, while ITO/Ag/ITO showed a 50% decrease in square resistance to 0.067 Ω/□ after annealing. The laminated stress is 104Mpa, and the adhesion strength with the GI layer reaches 5B level (ASTM D3359). The antioxidant test showed that the stacked structure did not oxidize after being placed under PR protection for 72 hours and patterned for 10 days. Tof sims analysis confirmed that MTD and SiO/SiN dielectric layer can completely block the diffusion of Cu under annealing conditions of 450 ℃ (LTPS) and 350 ℃ (Oxide). TFT device verification shows that the transfer characteristic curve of Cu gate is not significantly different from that of traditional Mo gate. The MTD/Cu (Ag)/MTD stacked film has excellent electrical properties, reliability, and process compatibility, and can withstand high temperature processes without diffusion. It is an ideal high‐performance low resistance gate material.

Zitieren

APA

Qu, C., He, B., Song, Z., Li, D., Li, L., Yao, X., Wang, B., Liu, Z., Zhang, W., & Zhou, W. (2026). P‐7.3: A study on low resistance gate Cu or Ag for AMOLED. SID Symposium Digest of Technical Papers, 57(S1), 1439-1441. https://doi.org/10.1002/sdtp.70003_383

Vancouver

Qu C, He B, Song Z, Li D, Li L, Yao X, et al. P‐7.3: A study on low resistance gate Cu or Ag for AMOLED. SID Symposium Digest of Technical Papers. 2026;57(S1):1439-1441. doi:10.1002/sdtp.70003_383

BibTeX
@article{Qu2026,
  author = {Qu, Cai-Yu and He, Bao-Sheng and Song, Zun-Qing and Li, Dong and Li, Liang-Jian and Yao, Xi-jie and Wang, Bing-Wei and Liu, Zheng and Zhang, Wen-Xuan and Zhou, Wei-Feng},
  title = {P‐7.3: A study on low resistance gate Cu or Ag for AMOLED},
  journal = {SID Symposium Digest of Technical Papers},
  year = {2026},
  volume = {57},
  number = {S1},
  pages = {1439--1441},
  doi = {10.1002/sdtp.70003_383}
}
Kostenlos starten →