Correlation between frictional force and surface roughness of orthodontic archwires
Scanning · 2015-11 · 37 (6) · 399-405
DOI: 10.1002/sca.21225 ↗Kurz gefasst
Fachartikel in der Zeitschrift Scanning, online erschienen am 27.05.2015. Verfasst von Samjin Choi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, College of Medicine, Kyung Hee University, Seoul, Korea. Hauptthemen laut MEDLINE: Friction, Orthodontic Wires, Surface Properties. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: Korean Health Technology Research & Development Project by the Ministry of Health & Welfare, Republic of Korea.
Abstract (Originalsprache)
Lateral force microscopy measures the lateral bending of the cantilever depending on the frictional force acting between the tip and surface. The aim of this study was to investigate and compare the relationship between the surface roughness and frictional resistance of four archwire and bracket combinations consisting of the 0.016‐inch NiTi and 0.019 × 0.025‐inch stainless steel archwires interacting clinically with two representative self‐ligating brackets, active‐type Clippy‐C ® ceramic self‐ligating brackets, and passive‐type Damon ® stainless steel self‐ligating brackets, using the lateral force microscopy technique. A 0.016‐inch NiTi archwire interacting with passive‐type Damon ® stainless steel self‐ligating brackets showed the smoothest surface roughness and the lowest frictional resistance compared to other combinations. The archwires interacting with passive‐type Damon ® stainless steel self‐ligating brackets showed significantly lower surface roughness and frictional resistance than those interacting with active‐type Clippy‐C ® ceramic self‐ligating brackets. The frictional force in the in vivo archwire and bracket system increased with increasing surface roughness of the archwire. This positive correlation suggests that surface roughness can be used as an evaluating marker for estimating the efficiency of orthodontic treatment, rather than the direct measurement of frictional force. SCANNING 37:399–405, 2015. © 2015 Wiley Periodicals, Inc.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Engineering, College of Medicine, Kyung Hee University, Seoul, Korea.
- Department of Orthodontics, College of Dentistry, Kyung Hee University, Seoul, Korea.
Förderung
- Korean Health Technology Research & Development Project by the Ministry of Health & Welfare
- Republic of Korea
Zitieren
APA
Choi, S., Hwang, E. Y., Park, H. K., & Park, Y. G. (2015). Correlation between frictional force and surface roughness of orthodontic archwires. Scanning, 37(6), 399-405. https://doi.org/10.1002/sca.21225
Vancouver
Choi S, Hwang EY, Park HK, Park YG. Correlation between frictional force and surface roughness of orthodontic archwires. Scanning. 2015;37(6):399-405. doi:10.1002/sca.21225
BibTeX
@article{Choi2015,
author = {Choi, Samjin and Hwang, Eun-Young and Park, Hun-Kuk and Park, Young-Guk},
title = {Correlation between frictional force and surface roughness of orthodontic archwires},
journal = {Scanning},
year = {2015},
volume = {37},
number = {6},
pages = {399--405},
doi = {10.1002/sca.21225}
}
EUVIMED