BiCLAW‐VC: A Leg‐Wheel Robot With Four Wheels Integrating Symmetric Claws Following Variable Cycloidal Trajectories
Journal of Field Robotics · 09.11.2026
DOI: 10.1002/rob.70381 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Field Robotics, online erschienen am 09.11.2026. Verfasst von Zhong Wei und 5 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To overcome the limitations of existing leg‐wheel robots, which require frequent locomotion mode switching according to terrain conditions and exhibit direction‐dependent obstacle‐crossing capability, this paper proposes a leg‐wheel robot with symmetric variable cycloidal claw locomotion mechanisms to improve terrain adaptability. The robot has four identical claw‐wheel mechanisms, each driven by two motors mounted on the body. One motor drives the rotation of the wheel, while the other adjusts the claw configuration relative to the wheel, thereby regulating the spatial orientation of the claw‐tip trajectory. The roots of each pair of claws are symmetrically mounted on the wheel through revolute joints, and the middle sections of the claws are connected by links to the output shaft of the claw configuration adjustment motor. The claws move along a cycloidal trajectory driven by wheel rotation. Through coordinated control of the two motors, the claw wheel can realize three locomotion modes: claw‐assisted rolling, wheel, and spoke‐wheel modes. Owing to its symmetric design, the robot exhibits identical locomotion modes and performance in both forward and backward directions, thereby achieving isotropic locomotion. This paper presents the robot design method in detail, establishes a dynamic model, and analyzes the step‐climbing capability and stability during stair climbing. A robot prototype was fabricated using three‐dimensional printing and machining, and experiments were conducted on locomotion in different modes, including step and stair climbing, pit escape, and locomotion over complex terrain. The experimental results demonstrate that the robot can stably and efficiently traverse complex environments using the three locomotion modes, climb steps up to 2.38 times the wheel radius and stairs with common daily‐life dimensions, and shows broad potential for applications such as inspection and post‐disaster search and rescue.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wei, Z., Gu, Y., Xiang, S., Yang, Y., Ding, Y., & Song, A. (2026). BiCLAW‐VC: A Leg‐Wheel Robot With Four Wheels Integrating Symmetric Claws Following Variable Cycloidal Trajectories. Journal of Field Robotics. https://doi.org/10.1002/rob.70381
Vancouver
Wei Z, Gu Y, Xiang S, Yang Y, Ding Y, Song A. BiCLAW‐VC: A Leg‐Wheel Robot With Four Wheels Integrating Symmetric Claws Following Variable Cycloidal Trajectories. Journal of Field Robotics. 2026. doi:10.1002/rob.70381
BibTeX
@article{Wei2026,
author = {Wei, Zhong and Gu, Yuquan and Xiang, Sheng and Yang, Yang and Ding, Yu and Song, Aiguo},
title = {BiCLAW‐VC: A Leg‐Wheel Robot With Four Wheels Integrating Symmetric Claws Following Variable Cycloidal Trajectories},
journal = {Journal of Field Robotics},
year = {2026},
doi = {10.1002/rob.70381}
}
EUVIMED