EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parasitic Precipitation to Achieve Strength‐Ductility Synergy in Al 0.3 CoCrFeNi High‐Entropy Alloy

Zheng Tian, Lichu Zhou, Yu Wang, Runguang Li, Feng Fang

Rare Metals · 2026-11 · 45 (11)

DOI: 10.1002/rar2.70711 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rare Metals, online erschienen am 14.11.2026. Verfasst von Zheng Tian und 4 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The introduction of intermetallic phases into high‐entropy alloys (HEAs) frequently leads to embrittlement, primarily due to their inherent brittleness. Leveraging the remarkable hardness of these intermetallic phases while mitigating their embrittling effects is crucial for developing high‐performance HEAs. Here, we propose a hierarchical heterostructure strategy that exploits the parasitic precipitation of the B2 + σ phase to transform the B2 phase from a conventional rigid hardening particle into a dislocation emission source and a plastically deformable phase during tensile deformation. Using an Al 0.3 CoCrFeNi HEA as a model material, a tailored microstructure comprising a bimodal face‐centered cubic (FCC) matrix and B2 + σ co‐precipitation was successfully engineered via conventional thermomechanical processing. The resultant alloy demonstrates a high yield strength of ∼780 MPa, an ultimate tensile strength of ∼1203 MPa, and a uniform elongation of ∼25%. Compared to the counterpart reinforced solely by the B2 phase, the B2 + σ co‐precipitation precipitated alloy achieves a pronounced strength enhancement with a negligible loss of ductility. This pronounced strength enhancement is primarily attributed to hetero‐deformation‐induced (HDI) stress combined with the effective hindrance of dislocation glide by the B2 + σ co‐precipitation. In situ high‐energy synchrotron X‐ray diffraction (HEXRD) tensile testing and TEM investigations reveal that the outstanding ductility originates from the σ phase triggering plastic deformation within the B2 phase. Furthermore, this synergistic co‐precipitation strategy imparts an ultrahigh tensile strength of 1615 MPa, an exceptional ductility of 25%, and a sustained high work‐hardening capacity at cryogenic temperatures. The superior cryogenic strain‐hardening capability is governed by synergistic mechanisms, including HDI strengthening and ductilization, alongside extensively activated planar slip and planar defect formation. Specifically, the B2 phase serves as an active dislocation emission source for the FCC matrix rather than a conventional passive barrier to dislocation motion, while concurrently promoting dislocation dissociation and planar defect generation. This study provides a new route for developing high‐performance structural metallic materials by rendering inherently brittle intermetallic precipitates plastically deformable.

Zitieren

APA

Tian, Z., Zhou, L., Wang, Y., Li, R., & Fang, F. (2026). Parasitic Precipitation to Achieve Strength‐Ductility Synergy in Al 0.3 CoCrFeNi High‐Entropy Alloy. Rare Metals, 45(11). https://doi.org/10.1002/rar2.70711

Vancouver

Tian Z, Zhou L, Wang Y, Li R, Fang F. Parasitic Precipitation to Achieve Strength‐Ductility Synergy in Al 0.3 CoCrFeNi High‐Entropy Alloy. Rare Metals. 2026;45(11). doi:10.1002/rar2.70711

BibTeX
@article{Tian2026,
  author = {Tian, Zheng and Zhou, Lichu and Wang, Yu and Li, Runguang and Fang, Feng},
  title = {Parasitic Precipitation to Achieve Strength‐Ductility Synergy in Al 0.3 CoCrFeNi High‐Entropy Alloy},
  journal = {Rare Metals},
  year = {2026},
  volume = {45},
  number = {11},
  doi = {10.1002/rar2.70711}
}
Kostenlos starten →