Achieving Strength–Ductility Synergy in a Near‐α Powder Metallurgy Titanium Alloy via Deformation‐Induced Nanoscale β Precipitation
Rare Metals · 2026-11 · 45 (11)
DOI: 10.1002/rar2.70708 ↗Kurz gefasst
Fachartikel in der Zeitschrift Rare Metals, online erschienen am 04.11.2026. Verfasst von Guinan Zhao und 8 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Powder metallurgy (PM) near‐α Ti alloys are often constrained by a pronounced strength–ductility trade‐off, due to the coarse lamellar microstructure formed during the sintering process. To address this issue, a thermomechanical route combining cyclic hot rolling with short‐time solution treatment was developed to improve the mechanical properties of a PM Ti‐6Al‐3Nb‐2Zr‐1Mo (Ti6321) alloy through multiscale microstructural regulation. The treatment refined the final α microstructure through early‐stage deformation and dissolution of residual α, deformation‐induced subdivision/recrystallization of the high‐temperature β matrix, and refined β→α transformation during cooling. For the thermomechanical samples subjected to 80% hot‐rolling reduction, strain‐induced anomalous segregation of β‐stabilizing elements (Nb and Mo) reduces the driving force for phase transformation. Consequently, highly dispersed intragranular nano‐β precipitates and transformed β structure (β t ) regions are formed. This microstructure enables a satisfactory strength–ductility balance in the thermomechanical PM Ti alloy, achieving a yield strength of 1041.27 MPa and an elongation of 9.76%. This is attributed to a complex interplay: profound strengthening effects driven by intragranular nanoprecipitation, coupled with the coordinated activation of multiple deformation mechanisms. The α/β phase boundaries effectively mediated dislocation slip. In addition, the strengthening effect is enhanced by a transition in the deformation mode of nano‐β precipitates from a pinning mechanism to a shearing mechanism. Moreover, in the β t regions, solute enrichment reduces the stacking fault energy, thereby activating pyramidal slip and promoting three‐dimensional plastic deformation. This study provides a multiscale microstructural design strategy for developing high‐performance PM near‐α titanium alloys.
Zitieren
APA
Zhao, G., Ouyang, D., Zhang, C., Zhang, J., Sun, M., Sun, Y., Li, N., Zhang, J., & Luo, G. (2026). Achieving Strength–Ductility Synergy in a Near‐α Powder Metallurgy Titanium Alloy via Deformation‐Induced Nanoscale β Precipitation. Rare Metals, 45(11). https://doi.org/10.1002/rar2.70708
Vancouver
Zhao G, Ouyang D, Zhang C, Zhang J, Sun M, Sun Y, et al. Achieving Strength–Ductility Synergy in a Near‐α Powder Metallurgy Titanium Alloy via Deformation‐Induced Nanoscale β Precipitation. Rare Metals. 2026;45(11). doi:10.1002/rar2.70708
BibTeX
@article{Zhao2026,
author = {Zhao, Guinan and Ouyang, Di and Zhang, Chongle and Zhang, Jian and Sun, Minghan and Sun, Yi and Li, Ning and Zhang, Jinyu and Luo, Guoqiang},
title = {Achieving Strength–Ductility Synergy in a Near‐α Powder Metallurgy Titanium Alloy via Deformation‐Induced Nanoscale β Precipitation},
journal = {Rare Metals},
year = {2026},
volume = {45},
number = {11},
doi = {10.1002/rar2.70708}
}
EUVIMED