EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual Modulation of Schottky Barrier Height and Width Enables High‐Performance p‐Type MoTe 2 Transistors

Zhe Zhang, Junxi Xu, Qijia Tian, Shida Huo, Yuan Xie, Jing Rao, Xiaodong Hu, Enxiu Wu

Rare Metals · 2026-09 · 45 (9)

DOI: 10.1002/rar2.70541 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rare Metals, online erschienen am 11.09.2026. Verfasst von Zhe Zhang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient hole injection at metal‐semiconductor interfaces remains a central challenge for high‐performance p‐type transistors based on two‐dimensional (2D) semiconductors. Although substantial efforts have been devoted to reducing Schottky barrier height through contact engineering, the barrier width is rarely addressed, thereby limiting carrier tunneling and overall device performance. Here, a contact engineering strategy is developed to simultaneously modulate the height and width of Schottky barriers in MoTe 2 p‐type transistors. Van der Waals (vdW) transferred Au electrodes form atomically clean interfaces that suppress Fermi‐level pinning, enabling reduced hole injection barriers via near‐intrinsic band alignment. Concurrently, ultraviolet (UV) optoelectronic p‐doping increases the hole density through charge trapping, compressing the depletion region and narrowing the barrier width to enhance tunneling injection. As a result, the device exhibits pronounced p‐type transport with a mobility of ∼69.93 cm 2 V −1 s −1 , an on‐state current of ∼50.22 μA μm −1 , and an on/off ratio exceeding 2 × 10 7 , while retaining the programmed state for over 15 days. More importantly, this work demonstrates that Schottky barrier height and width can be tuned independently while contributing synergistically to contact optimization. This strategy provides a general pathway toward high‐performance p‐type devices and complementary 2D electronic systems.

Zitieren

APA

Zhang, Z., Xu, J., Tian, Q., Huo, S., Xie, Y., Rao, J., Hu, X., & Wu, E. (2026). Dual Modulation of Schottky Barrier Height and Width Enables High‐Performance p‐Type MoTe 2 Transistors. Rare Metals, 45(9). https://doi.org/10.1002/rar2.70541

Vancouver

Zhang Z, Xu J, Tian Q, Huo S, Xie Y, Rao J, et al. Dual Modulation of Schottky Barrier Height and Width Enables High‐Performance p‐Type MoTe 2 Transistors. Rare Metals. 2026;45(9). doi:10.1002/rar2.70541

BibTeX
@article{Zhang2026,
  author = {Zhang, Zhe and Xu, Junxi and Tian, Qijia and Huo, Shida and Xie, Yuan and Rao, Jing and Hu, Xiaodong and Wu, Enxiu},
  title = {Dual Modulation of Schottky Barrier Height and Width Enables High‐Performance p‐Type MoTe 2 Transistors},
  journal = {Rare Metals},
  year = {2026},
  volume = {45},
  number = {9},
  doi = {10.1002/rar2.70541}
}
Kostenlos starten →