EUVIMEDEUVIMED entdecken
Crossref

The Effect of Low Temperature on Fatigue Performance of Typical Welded Joints in Polar Equipment

Kaiqing Qiao, Zhijie Liu, Jianbao Wei, Yuhang Sun, Xiaobang Wang, Rumin Teng

Quality and Reliability Engineering International · 2026-10 · 42 (6) · 2948-2962

DOI: 10.1002/qre.70276 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Quality and Reliability Engineering International, online erschienen am 01.06.2026. Verfasst von Kaiqing Qiao und 5 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Dalian Science and Technology Innovation Fund, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical properties and fatigue behavior of welded joints are key factors affecting the safe operation of polar equipment. In this study, fatigue tests were conducted on three types of EH36 welded joints, namely T‐welded, cruciform welded, and butt‐welded joints, at 20°C and −60°C. Mean S‐N curves and P‐S‐N curves with a 97.5% survival probability were obtained for these joints. The experimental results showed that low temperature significantly increased the yield strength σ s and ultimate tensile strength σ b of both EH36 base metal and weld metal. The EH36 weld metal exhibited higher σ s than the base metal, whereas its total tensile strain at fracture (TTSF) was lower. In addition, the difference in TTSF between the weld metal and base metal decreased as the temperature decreased. Low temperature significantly extended the fatigue lives of the welded joints. Among the three joint types, the butt‐welded joints exhibited the best fatigue performance, whereas the cruciform welded joints exhibited the worst. All tested joints showed similar failure characteristics, involving the growth of semi‐elliptical surface cracks or multiple semi‐elliptical cracks leading to through‐thickness fracture. Compared with the DNV‐GL design S‐N curve, all experimentally fitted P‐S‐N curves were located above the design curve. These results provide experimental support for the safety assessment of welded structures in polar equipment.

Förderung

  • National Natural Science Foundation of China
  • Dalian Science and Technology Innovation Fund
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Qiao, K., Liu, Z., Wei, J., Sun, Y., Wang, X., & Teng, R. (2026). The Effect of Low Temperature on Fatigue Performance of Typical Welded Joints in Polar Equipment. Quality and Reliability Engineering International, 42(6), 2948-2962. https://doi.org/10.1002/qre.70276

Vancouver

Qiao K, Liu Z, Wei J, Sun Y, Wang X, Teng R. The Effect of Low Temperature on Fatigue Performance of Typical Welded Joints in Polar Equipment. Quality and Reliability Engineering International. 2026;42(6):2948-2962. doi:10.1002/qre.70276

BibTeX
@article{Qiao2026,
  author = {Qiao, Kaiqing and Liu, Zhijie and Wei, Jianbao and Sun, Yuhang and Wang, Xiaobang and Teng, Rumin},
  title = {The Effect of Low Temperature on Fatigue Performance of Typical Welded Joints in Polar Equipment},
  journal = {Quality and Reliability Engineering International},
  year = {2026},
  volume = {42},
  number = {6},
  pages = {2948--2962},
  doi = {10.1002/qre.70276}
}
Kostenlos starten →