EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the Performance of Polytetrafluoroethylene and Polyoxymethylene Creasing Rules in the Package Conversion of Coated Paperboard

Roman Lev, Antti Pesonen, Johanna Lyytikäinen, Panu Tanninen, Ville Leminen

Packaging Technology and Science · 2026-08 · 39 (8) · 1003-1014

DOI: 10.1002/pts.70071 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Packaging Technology and Science, online erschienen am 18.03.2026. Verfasst von Roman Lev und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Novel dispersion‐coated paperboards offer a sustainable alternative to conventional plastic packaging but require modifications to traditional conversion methods. Although fibre‐based substrates with plastic coatings can be creased using conventional tools without substantial loss of barrier properties, more brittle dispersion coatings can crack under applied loads. To address this issue, two sets of creasing tools were designed and machined from polytetrafluoroethylene and polyoxymethylene in this study. Round and flat rule tip types were used to examine the convertibility and oil and grease resistance (OGR) of a commercially available dispersion‐coated paperboard MetsäBoard Prime FBB EB after creasing and folding. The performance of the round plastic rules was compared with that of an industrial‐grade steel creasing rule with the same geometry. The results showed that creasing with round rules and subsequent folding of the samples required similar forces. The flat plastic rules required higher creasing forces; however, the foldability of the samples was comparable to that of the samples creased with the round rules. Creasing with the steel rule drastically reduced the material OGR, especially for the samples creased parallel to the cross‐machine direction (CD). The materials creased with plastic rules did not encounter significant OGR reduction, except for the samples creased with flat rules parallel to the CD. After folding the samples, the maximum OGR time for all test points did not exceed 2 h, and the shortest minimum times were recorded for the steel‐creased samples. Scanning electron microscopy results confirmed severe coating cracking after creasing with the steel rule, and less surface damage to the plastic‐creased material was observed. Overall, the plastic rules demonstrated superior performance in the creasing process of the paperboard, facilitating their evaluation on a larger scale in future research.

Förderung

  • Business Finland

Zitieren

APA

Lev, R., Pesonen, A., Lyytikäinen, J., Tanninen, P., & Leminen, V. (2026). Investigating the Performance of Polytetrafluoroethylene and Polyoxymethylene Creasing Rules in the Package Conversion of Coated Paperboard. Packaging Technology and Science, 39(8), 1003-1014. https://doi.org/10.1002/pts.70071

Vancouver

Lev R, Pesonen A, Lyytikäinen J, Tanninen P, Leminen V. Investigating the Performance of Polytetrafluoroethylene and Polyoxymethylene Creasing Rules in the Package Conversion of Coated Paperboard. Packaging Technology and Science. 2026;39(8):1003-1014. doi:10.1002/pts.70071

BibTeX
@article{Lev2026,
  author = {Lev, Roman and Pesonen, Antti and Lyytikäinen, Johanna and Tanninen, Panu and Leminen, Ville},
  title = {Investigating the Performance of Polytetrafluoroethylene and Polyoxymethylene Creasing Rules in the Package Conversion of Coated Paperboard},
  journal = {Packaging Technology and Science},
  year = {2026},
  volume = {39},
  number = {8},
  pages = {1003--1014},
  doi = {10.1002/pts.70071}
}
Kostenlos starten →