Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass
Packaging Technology and Science · 02.10.2024
DOI: 10.1002/pts.2858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Packaging Technology and Science, online erschienen am 02.10.2024. Verfasst von Nikolaos Lengas und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the approval process of dangerous goods packagings, drop tests onto a flat, essentially unyielding surface are used to assess resistance against mechanical damage. International adopted regulations like ADR and RID define filling good dependent drop heights and filling degrees whilst the user needs to define the maximum gross mass to be tested and approved. Maximum packaging gross mass is defined conservatively and not reached in practice. To meet the defined gross mass in testing, using additives is permitted. However, in some cases, additives are not desirable due to packaging design or filling substance properties. This leads to deviations from the initial gross mass definition. Hence, a certain drop height adjustment is necessary to achieve the required impact loading. Laboratories frequently adjust drop height assuming a perfectly elastic collision that is inaccurate. Appropriate adjustment is not trivial due to energy conversion processes, for example, plastic deformation. In this work, a test stand is developed for measuring the change in kinetic energy of different packaging designs and filling substances in regulative drop tests. The experimental results are used to validate finite‐element (FE) models so that packaging properties can be varied in simulated drop test scenarios. The findings intend to describe the appropriate drop height adjustment of the respective packaging with same design but deviating gross mass to produce comparable mechanical response. The results are highly beneficial for testing laboratories, approval issuing authorities and packaging institutes confronted with the problem of testing packages with gross masses other than those to be approved.
Zitieren
APA
Lengas, N., Müller, K., Schlick‐Hasper, E., Neitsch, M., Johann, S., & Zehn, M. W. (2024). Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass. Packaging Technology and Science. https://doi.org/10.1002/pts.2858
Vancouver
Lengas N, Müller K, Schlick‐Hasper E, Neitsch M, Johann S, Zehn MW. Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass. Packaging Technology and Science. 2024. doi:10.1002/pts.2858
BibTeX
@article{Lengas2024,
author = {Lengas, Nikolaos and Müller, Karsten and Schlick‐Hasper, Eva and Neitsch, Marcel and Johann, Sergej and Zehn, Manfred W.},
title = {Drop Test Simulation of Packaging for Dangerous Goods: An Investigation of Appropriate Drop Height Adjustment in Case of Deviating Packaging Gross Mass},
journal = {Packaging Technology and Science},
year = {2024},
doi = {10.1002/pts.2858}
}
EUVIMED