Defect Engineering of Nd‐Doped BaFe 12 O 19 via Mild Alkaline Etching for Lightweight and High‐Efficiency Microwave‐Absorbing Coatings
physica status solidi (RRL) – Rapid Research Letters · 2026-07 · 20 (7)
DOI: 10.1002/pssr.70231 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (RRL) – Rapid Research Letters, online erschienen am 24.07.2026. Verfasst von Xiangkui Liao und 4 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben.
Abstract (Originalsprache)
Barium ferrite (BF) is a promising microwave‐absorbing material due to its magnetic loss, but its inherently low permittivity and large density severely restrict its overall absorption performance. Herein, we propose a mild ethylene glycol‐based alkaline etching strategy to engineer defects in BF, followed by the fabrication of BF/carbon nanotube (CNT)/polyimide (PI) composite coatings via an air‐spraying technique. Microstructural characterizations reveal that the etching process successfully introduces ∼3 nm mesopores, lattice distortions, and vacancy defects into BF without destroying its original morphology. These structural modulations significantly enhance the dielectric polarization loss while preserving the intrinsic magnetic properties. Upon compositing with CNTs, the coating with an optimal loading of 40 wt% CNT reaches the percolation threshold. Notably, the optimized etched composite (40CNT‐BF‐1) achieves an ultra‐broad effective absorption bandwidth of 3.53 GHz, spanning nearly the entire X ‐ band, representing a >40% improvement compared to its unetched counterpart. The enhanced microwave absorption is attributed to the synergistic optimization of impedance matching and electromagnetic attenuation, facilitated by defect‐induced dipolar/interfacial polarization and mesopore‐modulated permittivity. This article demonstrates a defect engineering strategy to fabricate composite microwave‐absorbing coatings with lower density than bulk ferrites, making them highly suitable for weight‐sensitive practical applications.
Zitieren
APA
Liao, X., Feng, X., Li, P., Xu, H., & Li, H. (2026). Defect Engineering of Nd‐Doped BaFe 12 O 19 via Mild Alkaline Etching for Lightweight and High‐Efficiency Microwave‐Absorbing Coatings. physica status solidi (RRL) – Rapid Research Letters, 20(7). https://doi.org/10.1002/pssr.70231
Vancouver
Liao X, Feng X, Li P, Xu H, Li H. Defect Engineering of Nd‐Doped BaFe 12 O 19 via Mild Alkaline Etching for Lightweight and High‐Efficiency Microwave‐Absorbing Coatings. physica status solidi (RRL) – Rapid Research Letters. 2026;20(7). doi:10.1002/pssr.70231
BibTeX
@article{Liao2026,
author = {Liao, Xiangkui and Feng, Xiaohua and Li, Pengyu and Xu, Hongsen and Li, Hua},
title = {Defect Engineering of Nd‐Doped BaFe 12 O 19 via Mild Alkaline Etching for Lightweight and High‐Efficiency Microwave‐Absorbing Coatings},
journal = {physica status solidi (RRL) – Rapid Research Letters},
year = {2026},
volume = {20},
number = {7},
doi = {10.1002/pssr.70231}
}
EUVIMED