In 2 S 3 Thin Films via Open‐Air Chemical Vapor Deposition Using Indium‐Diethyldithiocarbamate: Deposition and Characterization
physica status solidi (RRL) – Rapid Research Letters · 2024-04 · 18 (4)
DOI: 10.1002/pssr.202300383 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (RRL) – Rapid Research Letters, online erschienen am 24.12.2023. Verfasst von Akihiro Funaki und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Japan Science and Technology Agency.
Abstract (Originalsprache)
Cadmium‐free materials for the buffer layer of thin‐film solar cells and their low‐cost manufacturing methods have been of great interest in the solar industry. In this study, diindium trisulfide (In 2 S 3 ) is investigated as an alternative buffer layer material: In 2 S 3 thin film was deposited at atmospheric pressure utilizing open‐air chemical vapor deposition (CVD). Indium‐diethyldithiocarbamate (In‐DDTC) is used as the only solid precursor. The deposition conditions, crystal structure, optical properties, and electrical properties of In 2 S 3 thin films are studied. The solid source temperature is found to affect the morphology, whereas the substrate temperature affected the growth rate and the sulfur‐to‐indium ratio of the films. X‐Ray diffraction and Raman scattering measurements suggested that the prepared films consist of β ‐In 2 S 3 and show a strong (103)‐plane orientation under suitable deposition conditions. The films exhibited indirect and direct transitions around 2.0 eV and 2.7–2.8 eV, respectively. The thin films showed n‐type conduction, with the lowest resistivity of 28.6 Ω cm. Overall, In 2 S 3 thin films prepared via open‐air CVD are promising alternative buffer layer materials, which are expected to contribute to the realization of low‐cost and environmentally friendly thin‐film solar cells.
Förderung
- Japan Science and Technology Agency
Zitieren
APA
Funaki, A., Furumaki, F., Nishimura, T., & Yamada, A. (2024). In 2 S 3 Thin Films via Open‐Air Chemical Vapor Deposition Using Indium‐Diethyldithiocarbamate: Deposition and Characterization. physica status solidi (RRL) – Rapid Research Letters, 18(4). https://doi.org/10.1002/pssr.202300383
Vancouver
Funaki A, Furumaki F, Nishimura T, Yamada A. In 2 S 3 Thin Films via Open‐Air Chemical Vapor Deposition Using Indium‐Diethyldithiocarbamate: Deposition and Characterization. physica status solidi (RRL) – Rapid Research Letters. 2024;18(4). doi:10.1002/pssr.202300383
BibTeX
@article{Funaki2024,
author = {Funaki, Akihiro and Furumaki, Fumiya and Nishimura, Takahito and Yamada, Akira},
title = {In 2 S 3 Thin Films via Open‐Air Chemical Vapor Deposition Using Indium‐Diethyldithiocarbamate: Deposition and Characterization},
journal = {physica status solidi (RRL) – Rapid Research Letters},
year = {2024},
volume = {18},
number = {4},
doi = {10.1002/pssr.202300383}
}
EUVIMED