EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Sintering and Optical Characterization of LuAG: Ce Ceramics

Eliane Pinheiro Silva, Maria Jussara Matos Nascimento, Simone Santos Melo, Jose Carlos Sales, Yurimiler Leyet, Deyvid do Carmo Silva, Waltraud Kriven, Jerre Cristiano Alves Santos, Ronaldo Santos Silva

physica status solidi (b) · 2026-06 · 263 (6)

DOI: 10.1002/pssb.70256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift physica status solidi (b), online erschienen am 13.06.2026. Verfasst von Eliane Pinheiro Silva und 8 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates the synthesis and characterization of LuAG:Ce ceramics produced by conventional and laser sintering, focusing on crystal structure, densification, and photoluminescent properties. X‐ray diffraction confirmed the formation of a single‐phase cubic LuAG structure after calcination at 900 °C, with no secondary phases or Ce 3+ segregation. Laser sintering was optimized by varying beam diameter, heating rate, and dwell time, resulting in ceramics with high relative density and homogeneous microstructure in significantly reduced processing times. Photoluminescence analysis revealed excitation bands at 350 nm and 445 nm, and an emission band centered at 510 nm. Increasing Ce 3+ concentration caused a red shift in the emission peak, more pronounced in laser‐sintered samples. This effect, along with reduced emission intensity and changes in excitation band ratios, was associated with a higher concentration of oxygen vacancies. These results demonstrate the potential of laser sintering for efficient production of dense and luminescent ceramics, with important implications for defect control and optical performance.

Förderung

  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Zitieren

APA

Silva, E. P., Nascimento, M. J. M., Melo, S. S., Sales, J. C., Leyet, Y., Silva, D. D. C., Kriven, W., Santos, J. C. A., & Silva, R. S. (2026). Laser Sintering and Optical Characterization of LuAG: Ce Ceramics. physica status solidi (b), 263(6). https://doi.org/10.1002/pssb.70256

Vancouver

Silva EP, Nascimento MJM, Melo SS, Sales JC, Leyet Y, Silva DDC, et al. Laser Sintering and Optical Characterization of LuAG: Ce Ceramics. physica status solidi (b). 2026;263(6). doi:10.1002/pssb.70256

BibTeX
@article{Silva2026,
  author = {Silva, Eliane Pinheiro and Nascimento, Maria Jussara Matos and Melo, Simone Santos and Sales, Jose Carlos and Leyet, Yurimiler and Silva, Deyvid do Carmo and Kriven, Waltraud and Santos, Jerre Cristiano Alves and Silva, Ronaldo Santos},
  title = {Laser Sintering and Optical Characterization of LuAG: Ce Ceramics},
  journal = {physica status solidi (b)},
  year = {2026},
  volume = {263},
  number = {6},
  doi = {10.1002/pssb.70256}
}
Kostenlos starten →