EUVIMEDEUVIMED entdecken
Crossref

Improved Electrocatalytic Performance of Multiwalled Carbon Nanotube‐Anchored Au‐Based Bimetallic Catalysts [Au–X (X = Cu, Fe, and Sn)] for Direct Borohydride Fuel Cells

Bilwadal Dutta, Chandan Kumar Raul, Shubhadip Atta, Soumen Basu, Ajit Kumar Meikap

physica status solidi (b) · 2026-04 · 263 (4)

DOI: 10.1002/pssb.202500517 ↗

Kurz gefasst

Fachartikel in der Zeitschrift physica status solidi (b), online erschienen am 04.11.2025. Verfasst von Bilwadal Dutta und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: West Bengal Department of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of cost‐effective and high‐performance electrocatalysts for the borohydride oxidation reaction (BOR) is crucial to enhancing the efficiency of direct borohydride fuel cells (DBFCs). In this study, Au–X (Fe, Cu, and Sn) nanoparticles supported on multiwalled carbon nanotubes (MWCNTs) are prepared at room temperature and evaluated as anode electrocatalysts. The catalysts are thoroughly characterized using Raman spectroscopy, energy‐dispersive spectroscopy (EDX), field‐emission scanning electron microscopy (FESEM), X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy (XPS). Incorporating bimetallic nanoparticles into MWCNTs markedly improves the borohydride electrooxidation activity, with the AuCu/MWCNT catalyst exhibiting the most outstanding performance among all tested electrocatalysts. The AuCu/MWCNT catalyst possesses a crystallite size of 14.3 nm, an electrochemically active surface area (ECSA) of 2953.43 cm 2 mg −1 , a highest current density of 27.35 mA cm −2 , a higher turnover frequency 0.06 s −1 , and a low activation energy of 4.5 kJ mol −1 , along with the lowest charge transfer resistance of 61.5 ohms. In single‐cell DBFC evaluations conducted at 303 K, the AuCu/MWCNT catalyst achieves a maximum power density of 24.46 mW cm −2 and a current density of 36 mA cm −2 . These findings highlight the superior catalytic efficiency and economic advantage of AuCu/MWCNT, underscoring its potential as a durable electrocatalyst for next‐generation DBFC systems.

Förderung

  • West Bengal Department of Science and Technology

Zitieren

APA

Dutta, B., Raul, C. K., Atta, S., Basu, S., & Meikap, A. K. (2026). Improved Electrocatalytic Performance of Multiwalled Carbon Nanotube‐Anchored Au‐Based Bimetallic Catalysts [Au–X (X = Cu, Fe, and Sn)] for Direct Borohydride Fuel Cells. physica status solidi (b), 263(4). https://doi.org/10.1002/pssb.202500517

Vancouver

Dutta B, Raul CK, Atta S, Basu S, Meikap AK. Improved Electrocatalytic Performance of Multiwalled Carbon Nanotube‐Anchored Au‐Based Bimetallic Catalysts [Au–X (X = Cu, Fe, and Sn)] for Direct Borohydride Fuel Cells. physica status solidi (b). 2026;263(4). doi:10.1002/pssb.202500517

BibTeX
@article{Dutta2026,
  author = {Dutta, Bilwadal and Raul, Chandan Kumar and Atta, Shubhadip and Basu, Soumen and Meikap, Ajit Kumar},
  title = {Improved Electrocatalytic Performance of Multiwalled Carbon Nanotube‐Anchored Au‐Based Bimetallic Catalysts [Au–X (X = Cu, Fe, and Sn)] for Direct Borohydride Fuel Cells},
  journal = {physica status solidi (b)},
  year = {2026},
  volume = {263},
  number = {4},
  doi = {10.1002/pssb.202500517}
}
Kostenlos starten →