EUVIMEDEUVIMED entdecken
Crossref

One‐Step Solvothermal Synthesis of Cu(In, Ga)Se 2 Powders: Effects of Synthesis Parameters on Phase Evolution and Morphology

Pınar Yılmaz, Aylin Aytaç, Ali Murat Soydan, Ali Ata

physica status solidi (a) · 11.11.2026 · 223 (21)

DOI: 10.1002/pssa.70584 ↗

Kurz gefasst

Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 28.10.2026. Verfasst von Pınar Yılmaz und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu(In, Ga)Se 2 (CIGS)‐based chalcopyrite powders are promising precursor materials for thin‐film photovoltaic applications, but many low‐cost solution‐based synthesis methods require substantial amounts of complexing agents. In this study, CIGS powders were synthesized by a one‐step solvothermal route using triethanolamine (TEA), while the precursor‐to‐solvent ratio was adjusted to reduce TEA use relative to precursor loading and control phase development. The effects of reaction temperature (180–240 °C) and time (10–40 h) on phase evolution and morphology were systematically investigated. X‐ray diffraction (XRD) revealed increasingly pronounced chalcopyrite‐related reflections with temperature and reaction time, although contributions from secondary phases could not be excluded. Scanning electron microscopy (SEM) showed substantial changes in particle morphology and agglomeration. Within the investigated conditions, powders synthesized at 200 °C exhibited favorable chalcopyrite‐related phase development and morphological evolution, whereas prolonged treatment at 240 °C produced greater structural and morphological complexity. Further optimization at 240 °C demonstrated that the precursor‐to‐solvent ratio influenced phase development and particle morphology. Energy‐dispersive X‐ray spectroscopy (EDS) confirmed Cu, In, Ga, and Se in the analyzed region. The selected powder synthesized at 240 °C for 20 h with doubled TEA and fourfold precursor loading exhibited a BET specific surface area of 27 m 2 g −1 , supporting subsequent powder‐processing studies.

Förderung

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Zitieren

APA

Yılmaz, P., Aytaç, A., Soydan, A. M., & Ata, A. (2026). One‐Step Solvothermal Synthesis of Cu(In, Ga)Se 2 Powders: Effects of Synthesis Parameters on Phase Evolution and Morphology. physica status solidi (a), 223(21). https://doi.org/10.1002/pssa.70584

Vancouver

Yılmaz P, Aytaç A, Soydan AM, Ata A. One‐Step Solvothermal Synthesis of Cu(In, Ga)Se 2 Powders: Effects of Synthesis Parameters on Phase Evolution and Morphology. physica status solidi (a). 2026;223(21). doi:10.1002/pssa.70584

BibTeX
@article{Ylmaz2026,
  author = {Yılmaz, Pınar and Aytaç, Aylin and Soydan, Ali Murat and Ata, Ali},
  title = {One‐Step Solvothermal Synthesis of Cu(In, Ga)Se 2 Powders: Effects of Synthesis Parameters on Phase Evolution and Morphology},
  journal = {physica status solidi (a)},
  year = {2026},
  volume = {223},
  number = {21},
  doi = {10.1002/pssa.70584}
}
Kostenlos starten →