EUVIMEDEUVIMED entdecken
Crossref

Electrostatics of Common‐Channel Reconfigurable Field‐Effect Transistors: From X‐Shape to U‐Shape

Cigdem Cakirlar, Tetiana Obukhova, Oskar Baumgartner, Mischa Thesberg, Jose Maria Gonzalez‐Medina, Sara Mannaa, Ian O’Connor, Thomas Mikolajick, Damien Deleruyelle, Jens Trommer

physica status solidi (a) · 11.11.2026 · 223 (21)

DOI: 10.1002/pssa.70567 ↗

Kurz gefasst

Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 21.10.2026. Verfasst von Cigdem Cakirlar und 9 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: Horizon 2020 Framework Programme, Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates the effect of scaling on the electrostatic behavior of cross‐shape reconfigurable field‐effect transistors (RFETs) using three‐dimensional technology computer‐aided design simulations. The emerging device concept consists of multiple nanowires in a junction of a common channel, where multiple gates are aligned on the silicon and silicide junction interface, enabling polarity switching and signal routing within a compact layout. Although such a geometry can be utilized for new directions in neuromorphic or analog computation, it significantly increases the electrostatic interactions. The focus of the work is to understand the impact of the gate‐to‐gate distance and nanowire width on the on‐state current. The energy barrier in the ungated common‐channel region was found to be the limiting factor, as excessive fringing field coupling at short gate‐to‐gate distances causes electrostatic crowding and barrier sharpening, thereby restricting carrier transport. To overcome the electrostatic limitation of the cross‐shape RFET, a three‐dimensional U‐shape RFET was proposed. Due to its gate‐all‐around coverage of the metal–semiconductor junctions, electrostatic control was found to be stronger. U‐shape geometry achieves a high on‐state current with a minimal sensitivity to gate‐to‐gate distance variations. This work derives practical design guidelines for 3D RFET architectures, aiming to balance device compactness and electrostatic efficiency.

Förderung

  • Horizon 2020 Framework Programme
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Cakirlar, C., Obukhova, T., Baumgartner, O., Thesberg, M., Gonzalez‐Medina, J. M., Mannaa, S., O’Connor, I., Mikolajick, T., Deleruyelle, D., & Trommer, J. (2026). Electrostatics of Common‐Channel Reconfigurable Field‐Effect Transistors: From X‐Shape to U‐Shape. physica status solidi (a), 223(21). https://doi.org/10.1002/pssa.70567

Vancouver

Cakirlar C, Obukhova T, Baumgartner O, Thesberg M, Gonzalez‐Medina JM, Mannaa S, et al. Electrostatics of Common‐Channel Reconfigurable Field‐Effect Transistors: From X‐Shape to U‐Shape. physica status solidi (a). 2026;223(21). doi:10.1002/pssa.70567

BibTeX
@article{Cakirlar2026,
  author = {Cakirlar, Cigdem and Obukhova, Tetiana and Baumgartner, Oskar and Thesberg, Mischa and Gonzalez‐Medina, Jose Maria and Mannaa, Sara and O’Connor, Ian and Mikolajick, Thomas and Deleruyelle, Damien and Trommer, Jens},
  title = {Electrostatics of Common‐Channel Reconfigurable Field‐Effect Transistors: From X‐Shape to U‐Shape},
  journal = {physica status solidi (a)},
  year = {2026},
  volume = {223},
  number = {21},
  doi = {10.1002/pssa.70567}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche