Effect of Sintering Temperature on the Structural Characteristics of Stabilized ZrO 2 –Based Ceramics
physica status solidi (a) · 22.04.2026 · 223 (8)
DOI: 10.1002/pssa.202501023 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 17.04.2026. Verfasst von N. Korsunska und 8 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.
Abstract (Originalsprache)
The structural evolution of 1Ce10ScSZ and 0.5Ce0.5Gd10ScSZ ceramics is investigated as a function of sintering temperature in the range of 1100–1500°C. The ceramics are synthesized from commercial powders with compositions of 1 mol.% CeO 2 – 10 mol.% Sc 2 O 3 – 89 mol.% ZrO 2 (1Ce10ScSZ) and 0.5 mol.% CeO 2 – 0.5 mol.% Gd – 10 mol.% Sc 2 O 3 – 89 mol.% ZrO 2 (0.5Ce0.5Gd10ScSZ). X‐ray diffraction confirms that the initial powders possess a single‐phase cubic fluorite structure. After sintering, the 0.5Ce0.5Gd10ScSZ ceramics maintains the cubic phase at all temperatures investigated, indicating high structural stability. In contrast, the 1Ce10ScSZ one sintered at 1100°C contains both cubic and rhombohedral phases. These results demonstrate that the Ce/Gd ratio strongly influences phase stability in scandium‐stabilized zirconia. The rhombohedral phase formation in 1Ce10ScSZ is attributed to increased residual porosity, which promotes lattice relaxation and symmetry lowering at low sintering temperatures. A lower heating rate markedly reduces porosity and suppresses rhombohedral formation, leading to fully cubic ceramics.
Zitieren
APA
Korsunska, N., Prosolenko, V., Melnichuk, O., Pęcak, K., Melnichuk, L., Hryniszyn, A., Vrublevska, O., Alekseyenko, V., & Khomenkova, L. (2026). Effect of Sintering Temperature on the Structural Characteristics of Stabilized ZrO 2 –Based Ceramics. physica status solidi (a), 223(8). https://doi.org/10.1002/pssa.202501023
Vancouver
Korsunska N, Prosolenko V, Melnichuk O, Pęcak K, Melnichuk L, Hryniszyn A, et al. Effect of Sintering Temperature on the Structural Characteristics of Stabilized ZrO 2 –Based Ceramics. physica status solidi (a). 2026;223(8). doi:10.1002/pssa.202501023
BibTeX
@article{Korsunska2026,
author = {Korsunska, N. and Prosolenko, V. and Melnichuk, O. and Pęcak, K. and Melnichuk, L. and Hryniszyn, A. and Vrublevska, O. and Alekseyenko, V. and Khomenkova, L.},
title = {Effect of Sintering Temperature on the Structural Characteristics of Stabilized ZrO 2 –Based Ceramics},
journal = {physica status solidi (a)},
year = {2026},
volume = {223},
number = {8},
doi = {10.1002/pssa.202501023}
}
EUVIMED