Design and Fabrication of a Microstrip Patch Antenna Using a Flexible Low‐Dielectric, Low‐Loss Substrate
physica status solidi (a) · 2025-12 · 222 (24)
DOI: 10.1002/pssa.202500550 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 25.11.2025. Verfasst von Abhijith Sivan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 30 Literaturangaben.
Abstract (Originalsprache)
This study demonstrates the development and application of a low‐loss flexible dielectric substrate for flexible microwave antennas, consisting of butyl rubber (BR) filled with amorphous fuzed silicon dioxide (SiO 2 ). The composite was manufactured using two‐roll mixing and hot pressing, resulting in a dense substrate with uniformly dispersed fillers in the BR matrix. X‐Ray diffraction structural investigation confirmed the amorphous nature. The coefficient of thermal expansion for silicon dioxide‐filled butyl rubber (BR/SiO 2 ) composite with a weight percentage of 40 was 46 × 10 −6 /K. Dielectric measurements conducted with a vector network analyzer indicated a consistent dielectric constant (≈2.7) and minimal dielectric loss (≈0.002) in the frequency range 900 MHz to 4.5 GHz, using the resonant method, affirming suitability for microwave applications. A microstrip patch antenna was constructed on the composite substrate and the reflection coefficients (S 11 ) were evaluated under bending conditions of 0°, 10°, and 20°. The strong concordance between simulated and practicalS 11 parameters has evidenced optimal performance. In this study, the BR/SiO 2 composite has been identified as a highly suitable material for conformal antenna substrates, offering crucial properties like flexibility, low dielectric loss, and thermal stability for flexible microwave and wearable electronics.
Zitieren
APA
Sivan, A., Azeem, V. M., kumar, N., & Murali, K. M. P. (2025). Design and Fabrication of a Microstrip Patch Antenna Using a Flexible Low‐Dielectric, Low‐Loss Substrate. physica status solidi (a), 222(24). https://doi.org/10.1002/pssa.202500550
Vancouver
Sivan A, Azeem VM, kumar N, Murali KMP. Design and Fabrication of a Microstrip Patch Antenna Using a Flexible Low‐Dielectric, Low‐Loss Substrate. physica status solidi (a). 2025;222(24). doi:10.1002/pssa.202500550
BibTeX
@article{Sivan2025,
author = {Sivan, Abhijith and Azeem, Vadakkathintakath Muhammed and kumar, Nikhil and Murali, Kodakkattu mana Purushothaman},
title = {Design and Fabrication of a Microstrip Patch Antenna Using a Flexible Low‐Dielectric, Low‐Loss Substrate},
journal = {physica status solidi (a)},
year = {2025},
volume = {222},
number = {24},
doi = {10.1002/pssa.202500550}
}
EUVIMED