Low‐Temperature Processing to Obtain Contact Resistance of
physica status solidi (a) · 2025-04 · 222 (7)
DOI: 10.1002/pssa.202400636 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 30.12.2024. Verfasst von Aaron Hardy und 15 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: U.S. Air Force.
Abstract (Originalsprache)
Low‐resistance Ohmic contacts are necessary for high‐performance electronic devices. Ultrawide‐bandgap semiconductor materials typically have high‐resistance Ohmic contacts between the metal contact and the semiconductor. For single‐crystal boron‐doped diamond, with a bandgap of 5.5 eV, the reported specific contact resistance values vary from >10 −3 Ω cm 2 to the lowest reported value of 2 × 10 −7 Ω cm 2 . To obtain this low‐resistance Ohmic contact, a high temperature, >500 °C, annealing is usually required, which can limit fabrication procedures and compromise device designs. On p‐type single‐crystal diamond, the lowest reported contact resistance is 0.39 Ω mm. This article reports specific contact resistances of 8.2 × 10 −8 to 3.6 × 10 −7 Ω cm 2 and contact resistances 0.027 to 0.041 Ω mm, which are significantly better than reports in the literature and are achieved without the annealing step. The results are achieved by reactive ion etching 10 to 20 nm into the boron‐doped diamond surface. After the etch, evaporated Ti/Au forms Ohmic contacts with resistances between 0.08 and 0.2 Ω mm without an anneal. An additional step of exposing the etched surface to an intense H 2 plasma at 700 °C before Ti/Au deposition, results in Ohmic contacts between 0.027 and 0.041 Ω mm.
Förderung
- U.S. Air Force
Zitieren
APA
Hardy, A., Geis, M. W., Daulton, J. W., Turner, G. W., Polking, M. J., Liddell, J., Nebiolo, E., Myszka, M., Hollis, M. A., Ivanov, T. G., Birdwell, A. G., Ruzmetov, D., Weil, J., Jankowski, N. R., Grotjohn, T. A., & Zhang, B. (2025). Low‐Temperature Processing to Obtain Contact Resistance of. physica status solidi (a), 222(7). https://doi.org/10.1002/pssa.202400636
Vancouver
Hardy A, Geis MW, Daulton JW, Turner GW, Polking MJ, Liddell J, et al. Low‐Temperature Processing to Obtain Contact Resistance of. physica status solidi (a). 2025;222(7). doi:10.1002/pssa.202400636
BibTeX
@article{Hardy2025,
author = {Hardy, Aaron and Geis, Michael W. and Daulton, Jeffery W. and Turner, George W. and Polking, Mark J. and Liddell, John and Nebiolo, Emily and Myszka, Michael and Hollis, Mark A. and Ivanov, Tony G. and Birdwell, A. Glen and Ruzmetov, Dmitry and Weil, James and Jankowski, Nicholas R. and Grotjohn, Timothy A. and Zhang, Beijia},
title = {Low‐Temperature Processing to Obtain Contact Resistance of},
journal = {physica status solidi (a)},
year = {2025},
volume = {222},
number = {7},
doi = {10.1002/pssa.202400636}
}
EUVIMED