EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Structural Evolution of Sequentially Evaporated (Cs,FA)Pb(I,Br) 3 Perovskite Thin Films via In Situ X‐Ray Diffraction

Karl L. Heinze, Tobias Schulz, Roland Scheer, Paul Pistor

physica status solidi (a) · 2024-02 · 221 (3)

DOI: 10.1002/pssa.202300690 ↗

Kurz gefasst

Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 16.01.2024. Verfasst von Karl L. Heinze und 3 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Bundesministerium für Bildung, Wissenschaft, Forschung und Technologie, Ministerio de Ciencia, Innovación y Universidades.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Evaporation of perovskite thin films for solar cell applications is a solvent‐free, well controllable, and scalable deposition path with promising prospects for commercialization. Compared to commonly applied simultaneous co‐evaporation of various halide precursor salts, sequential evaporation followed by an annealing step allows to better control the amount of deposited precursors, and has the potential to largely improve reproducibility. In this work, Cs/formamidinium (FA)‐based lead iodide perovskites are deposited via sequential evaporation in a vacuum chamber and the phase formation and evolution of different precursor‐stacking sequences and annealing conditions are investigated with in situ X‐ray diagnostics. In addition, some Br is added to investigate the effect of halide intermixing. The stacking sequence is found to strongly influence the formation of dominant phases as well as the preferential orientation and HGHmorphology of the as‐deposited films. These variations in turn affect the diffusion and conversion during thermal annealing and ultimately the conversion ratio of the final perovskite layers. For example, it is found that starting the stacking sequences with the A cations (CsI, FAI) favors a fast and complete conversion of the perovskite phase. However, the result is the formation of perovskite layers with large voids.

Förderung

  • Ministerio de Ciencia e Innovación
  • Bundesministerium für Bildung, Wissenschaft, Forschung und Technologie
  • Ministerio de Ciencia, Innovación y Universidades

Zitieren

APA

Heinze, K. L., Schulz, T., Scheer, R., & Pistor, P. (2024). Structural Evolution of Sequentially Evaporated (Cs,FA)Pb(I,Br) 3 Perovskite Thin Films via In Situ X‐Ray Diffraction. physica status solidi (a), 221(3). https://doi.org/10.1002/pssa.202300690

Vancouver

Heinze KL, Schulz T, Scheer R, Pistor P. Structural Evolution of Sequentially Evaporated (Cs,FA)Pb(I,Br) 3 Perovskite Thin Films via In Situ X‐Ray Diffraction. physica status solidi (a). 2024;221(3). doi:10.1002/pssa.202300690

BibTeX
@article{Heinze2024,
  author = {Heinze, Karl L. and Schulz, Tobias and Scheer, Roland and Pistor, Paul},
  title = {Structural Evolution of Sequentially Evaporated (Cs,FA)Pb(I,Br) 3 Perovskite Thin Films via In Situ X‐Ray Diffraction},
  journal = {physica status solidi (a)},
  year = {2024},
  volume = {221},
  number = {3},
  doi = {10.1002/pssa.202300690}
}
Kostenlos starten →