Shear and combustion characterization of printable ammonium perchlorate composite propellant formulations
Propellants, Explosives, Pyrotechnics · 2024-01 · 49 (1)
DOI: 10.1002/prep.202300154 ↗Kurz gefasst
Fachartikel in der Zeitschrift Propellants, Explosives, Pyrotechnics, online erschienen am 27.11.2023. Verfasst von Dylan C. Purcell und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 15 Literaturangaben. Gefördert von: Army Research Laboratory.
Abstract (Originalsprache)
Seven formulations of ammonium perchlorate composite propellant (APCP) are developed and their properties relevant for successful additive manufacture are characterized. Extrusion in a custom‐built 3D printing system and spindle viscometry are used to collect viscosity measurements of curing primary and non‐curing secondary versions of the formulations. The formulations that behave similarly to a Bingham plastic, with apparent viscosities between 4 and 8 thousand Pa*s at 30 minutes post‐mix, are determined to be most suitable for printing applications. Measurements of one material show a yield stress of 1 kPa. Ambient pressure burn rates of 2.0–2.9 mm/s were measured for the compositions tested. All measured burn rates were comparable to the lower end of typical burn rates for APCP. The results of the characterization demonstrate a propellant suitable for use in a 3D printing system.
Förderung
- Army Research Laboratory
Zitieren
APA
Purcell, D. C., Hargather, M. J., & Hargather, C. Z. (2024). Shear and combustion characterization of printable ammonium perchlorate composite propellant formulations. Propellants, Explosives, Pyrotechnics, 49(1). https://doi.org/10.1002/prep.202300154
Vancouver
Purcell DC, Hargather MJ, Hargather CZ. Shear and combustion characterization of printable ammonium perchlorate composite propellant formulations. Propellants, Explosives, Pyrotechnics. 2024;49(1). doi:10.1002/prep.202300154
BibTeX
@article{Purcell2024,
author = {Purcell, Dylan C. and Hargather, Michael J. and Hargather, Chelsey Z.},
title = {Shear and combustion characterization of printable ammonium perchlorate composite propellant formulations},
journal = {Propellants, Explosives, Pyrotechnics},
year = {2024},
volume = {49},
number = {1},
doi = {10.1002/prep.202300154}
}
EUVIMED