EUVIMEDEUVIMED entdecken
Crossref

Process optimization of nanosecond pulsed packed‐bed discharge plasma for SF 6 degradation based on response surface methodology

Nan Jiang, Youchi Zhou, Bangfa Peng, Jie Li, Na Lu, Kefeng Shang

Plasma Processes and Polymers · 2023-07 · 20 (7)

DOI: 10.1002/ppap.202200237 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Plasma Processes and Polymers, online erschienen am 03.04.2023. Verfasst von Nan Jiang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a nanosecond pulsed packed‐bed discharge (PBD) plasma was developed for SF 6 degradation under different dilution gases. The discharge form transfers from filamentary discharge to the combination of surface discharge and microdischarge after introducing the packing material regardless of the dilution gas used, and the local electric field strength and SF 6 degradation performance are promoted. The mean electron energy and rate coefficient for SF 6 excitation in SF 6 /Ar system are significantly higher than those in SF 6 /N 2 or SF 6 /air system, which results in higher SF 6 degradation efficiency in SF 6 /Ar system. Moreover, the response surface methodology based on the Box–Behnken design model was constructed to optimize several key process parameters including pulsed voltage, gas flow rate, oxygen content, and relative humidity, as well as assess the contribution of each parameter to SF 6 degradation. The proposed optimization model shows a satisfactory correlation between the predicted and the experimental results. The energy yield concerning SF 6 degradation in nanosecond pulsed PBD plasma achieves approximately 75.3 g/kWh with nearly complete degradation. This work is expected to provide an efficient and energy‐saving plasma technique for SF 6 degradation.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Jiang, N., Zhou, Y., Peng, B., Li, J., Lu, N., & Shang, K. (2023). Process optimization of nanosecond pulsed packed‐bed discharge plasma for SF 6 degradation based on response surface methodology. Plasma Processes and Polymers, 20(7). https://doi.org/10.1002/ppap.202200237

Vancouver

Jiang N, Zhou Y, Peng B, Li J, Lu N, Shang K. Process optimization of nanosecond pulsed packed‐bed discharge plasma for SF 6 degradation based on response surface methodology. Plasma Processes and Polymers. 2023;20(7). doi:10.1002/ppap.202200237

BibTeX
@article{Jiang2023,
  author = {Jiang, Nan and Zhou, Youchi and Peng, Bangfa and Li, Jie and Lu, Na and Shang, Kefeng},
  title = {Process optimization of nanosecond pulsed packed‐bed discharge plasma for SF 6 degradation based on response surface methodology},
  journal = {Plasma Processes and Polymers},
  year = {2023},
  volume = {20},
  number = {7},
  doi = {10.1002/ppap.202200237}
}
Kostenlos starten →