EUVIMEDEUVIMED entdecken
Crossref

MBS Core Shell Optimization and Alpha SAN Modification for Improved Mechanical and Thermal Properties of PVC Composites

Penghao Zhang, Ruguo Du, Xinguo Xiao, Baijun Liu, Mingyao Zhang

Journal of Polymer Science · 21.11.2026

DOI: 10.1002/pola.70392 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Science, online erschienen am 21.11.2026. Verfasst von Penghao Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Balancing impact toughness and heat resistance remains a challenge for rigid poly(vinyl chloride) (PVC), because rubber toughening often reduces thermal performance. Here, methyl methacrylate‐butadiene‐styrene (MBS) core‐shell particles are synthesized by emulsion graft polymerization and used to toughen PVC. Increasing MBS content induces a pronounced brittle‐to‐ductile transition, and 12 wt% MBS increases the impact strength from 3.17 to 91.5 kJ/m 2 . Although 14 wt% MBS produced a higher impact strength, 12 wt% was selected for subsequent structural optimization as a compromise with yield‐strength retention. An St/MMA mass ratio of 6/4 and a PB core/shell mass ratio of 6/4 provided favorable mechanical performance, with an impact strength of 102.4 kJ/m 2 . Subsequent addition of SAN or α‐SAN increased HDT and VST but reduced impact strength. Compared with SAN, α‐SAN provided better impact‐strength retention at equivalent loadings. At 20 wt% α‐SAN, the composite exhibited an impact strength of 12.7 kJ/m 2 , an HDT of 74.7°C, and a VST of 88.8°C. DMA results were consistent with a reduced phase‐separation tendency in the α‐SAN‐containing composites, although complete thermodynamic miscibility could not be established. These findings provide comparative insights into the relationships between MBS architecture, heat‐resistant modifier structure, and the mechanical and thermal properties of PVC composites.

Zitieren

APA

Zhang, P., Du, R., Xiao, X., Liu, B., & Zhang, M. (2026). MBS Core Shell Optimization and Alpha SAN Modification for Improved Mechanical and Thermal Properties of PVC Composites. Journal of Polymer Science. https://doi.org/10.1002/pola.70392

Vancouver

Zhang P, Du R, Xiao X, Liu B, Zhang M. MBS Core Shell Optimization and Alpha SAN Modification for Improved Mechanical and Thermal Properties of PVC Composites. Journal of Polymer Science. 2026. doi:10.1002/pola.70392

BibTeX
@article{Zhang2026,
  author = {Zhang, Penghao and Du, Ruguo and Xiao, Xinguo and Liu, Baijun and Zhang, Mingyao},
  title = {MBS Core Shell Optimization and Alpha SAN Modification for Improved Mechanical and Thermal Properties of PVC Composites},
  journal = {Journal of Polymer Science},
  year = {2026},
  doi = {10.1002/pola.70392}
}
Kostenlos starten →