EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyethylene‐Polyamide‐6 Diblock Copolymers for Fused Filament Fabrication

Elsa M. Schoeneberger, Gerrit A. Luinstra

Journal of Polymer Science · 15.04.2026 · 64 (8) · 1744-1759

DOI: 10.1002/pola.70085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Science, online erschienen am 05.03.2026. Verfasst von Elsa M. Schoeneberger und 1 weiteren Autor:innen. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

HDPE‐ block ‐PA6 polymers for fused filament fabrication (FFF) were prepared in two consecutive polymerization processes. Intermediate acid chloride endfunctionalized polyethylenes (PE) of 2000 and 6500 Da were obtained in multiple steps from ethylene by the initial action of an iron bisimine pyridine catalyst. They were used as macroinitiators in the anionic ring opening polymerization of ε‐caprolactam. The degree of polymerization of PA6‐block ranged from 18 to about 300. Imaging, blending experiments (compatibilization of PE and PA6), Molau‐type testing and thermal properties show that phase‐separated block copolymers are obtained. The tensile strength of the materials was between 7.5 and 56 MPa with an elongation at break between 7% and 140%; low molecular weight block copolymers are brittle, ductile properties arise when the reaches 300 for a HDPE block of 2000 Da. FFF‐printed specimens of the block copolymer with a HDPE block of 6500 Da and of 176 could be annealed at 140°C (2 h) without a dimensional loss to yield a material with about the same mechanical properties as an injection molded sample, almost doubling the tensile strength of the FFF‐printed sample.

Zitieren

APA

Schoeneberger, E. M., & Luinstra, G. A. (2026). Polyethylene‐Polyamide‐6 Diblock Copolymers for Fused Filament Fabrication. Journal of Polymer Science, 64(8), 1744-1759. https://doi.org/10.1002/pola.70085

Vancouver

Schoeneberger EM, Luinstra GA. Polyethylene‐Polyamide‐6 Diblock Copolymers for Fused Filament Fabrication. Journal of Polymer Science. 2026;64(8):1744-1759. doi:10.1002/pola.70085

BibTeX
@article{Schoeneberger2026,
  author = {Schoeneberger, Elsa M. and Luinstra, Gerrit A.},
  title = {Polyethylene‐Polyamide‐6 Diblock Copolymers for Fused Filament Fabrication},
  journal = {Journal of Polymer Science},
  year = {2026},
  volume = {64},
  number = {8},
  pages = {1744--1759},
  doi = {10.1002/pola.70085}
}
Kostenlos starten →