Effect of spandex linear density and twist multiplier on the properties of core spun yarn and denim fabric
SPE Polymers · 2024-10 · 5 (4) · 610-623
DOI: 10.1002/pls2.10149 ↗Kurz gefasst
Fachartikel in der Zeitschrift SPE Polymers, online erschienen am 28.07.2024. Verfasst von Md. Nahid Hassan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology, Government of the People’s Republic of Bangladesh.
Abstract (Originalsprache)
The utilization of core‐spun yarns with spandex has achieved significant interest over the past decade because of their exceptional stretchability, resilience, and comfort features. The main objective of this study was to evaluate the effects of changing the spandex denier and twist multiplier on the physio‐mechanical properties of 16 Ne core spun yarn and the produced denim fabric using these yarns as weft. Core‐spun yarns were produced from three different spandex deniers at various TM values, where cotton roving was used as the sheath. Fabrics were manufactured using an air‐jet weaving machine with the core spun yarn as weft and 100% ring cotton yarn as warp (12 Ne) following the identical 3/1 twill weave pattern. Results reveal that using different spandex percentages shows better results at different TM parameters. Both yarn and fabric were attained at a twist multiplier of 5.0, 5.5, and 6.0 for 40, 70, and 105 D, respectively. Additionally, it was discovered that the yarn produced using lower spandex denier gives higher tenacity for yarn and fabric. However, the yarn produced using a higher spandex denier gives higher elongation percentage for yarn, higher tear strength, recovery, and lower growth percentage fabric. Highlights Influence of spandex denier and twist multiplier on the physio‐mechanical properties of core‐spun yarn and the resulting denim fabric. The higher spandex denier exhibited greater tear strength, better recovery, and lower fabric growth percentages. Increasing the twist multiplier initially increased the tenacity and elongation percentage of yarns and fabrics, followed by a decrease. Higher spandex percentages reduced hairiness and increased with higher twist levels. Higher spandex denier indicates the need for tailored TM settings based on spandex denier to achieve desired fabric properties.
Förderung
- Ministry of Science and Technology, Government of the People’s Republic of Bangladesh
Zitieren
APA
Hassan, M. N., Rokonuzzaman, M., Razzaque, A., Rahim, M. A., Hossain, A., & Islam, T. (2024). Effect of spandex linear density and twist multiplier on the properties of core spun yarn and denim fabric. SPE Polymers, 5(4), 610-623. https://doi.org/10.1002/pls2.10149
Vancouver
Hassan MN, Rokonuzzaman M, Razzaque A, Rahim MA, Hossain A, Islam T. Effect of spandex linear density and twist multiplier on the properties of core spun yarn and denim fabric. SPE Polymers. 2024;5(4):610-623. doi:10.1002/pls2.10149
BibTeX
@article{Hassan2024,
author = {Hassan, Md. Nahid and Rokonuzzaman, Md. and Razzaque, Abdur and Rahim, Md. Abdur and Hossain, Alimran and Islam, Tarikul},
title = {Effect of spandex linear density and twist multiplier on the properties of core spun yarn and denim fabric},
journal = {SPE Polymers},
year = {2024},
volume = {5},
number = {4},
pages = {610--623},
doi = {10.1002/pls2.10149}
}
EUVIMED