Testing VIPV Curved Modules: Methods and Challenges
Progress in Photovoltaics: Research and Applications · 2026-06 · 34 (6) · 744-757
DOI: 10.1002/pip.70099 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 24.03.2026. Verfasst von Ricardo Moruno und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, European Regional Development Fund.
Abstract (Originalsprache)
Vehicle‐integrated photovoltaics (VIPV) offer a promising pathway to increase electric‐vehicle autonomy, yet their characterization is challenged by curved geometries and non‐uniform irradiance conditions. This work presents and validates a comprehensive methodology for the characterization of curved photovoltaic modules. Standard test condition (STC) I–V curves and relative angular response (RAR) measurements are performed on a set of one‐dimensional cylindrical modules with varying curvature radii as well as on a commercial two‐dimensional curved VIPV module. Outdoor measurements using a dual‐axis programmable solar tracker are systematically compared with indoor measurements obtained using a collimated‐light solar simulator. Results demonstrate excellent agreement between indoor and outdoor STC I–V curves, with deviations below 1.5%, confirming the suitability of collimated solar simulation for rating curved PV modules. The study further analyzes the impact of curvature, temperature, and diffuse irradiance on angular response and proposes best practices to reduce measurement dispersion. These findings provide a robust experimental foundation for future standardization of VIPV characterization procedures.
Förderung
- Agencia Estatal de Investigación
- European Regional Development Fund
Zitieren
APA
Moruno, R., Martín, F., Redondo, J. M., Malo, J., José, L. J. S., Vallerotto, G., Askins, S., Núñez, R., Domínguez, C., Antón, I., & Herrero, R. (2026). Testing VIPV Curved Modules: Methods and Challenges. Progress in Photovoltaics: Research and Applications, 34(6), 744-757. https://doi.org/10.1002/pip.70099
Vancouver
Moruno R, Martín F, Redondo JM, Malo J, José LJS, Vallerotto G, et al. Testing VIPV Curved Modules: Methods and Challenges. Progress in Photovoltaics: Research and Applications. 2026;34(6):744-757. doi:10.1002/pip.70099
BibTeX
@article{Moruno2026,
author = {Moruno, Ricardo and Martín, Francisco and Redondo, Juan Manuel and Malo, Javier and José, Luis J. San and Vallerotto, Guido and Askins, Steve and Núñez, Rubén and Domínguez, César and Antón, Ignacio and Herrero, Rebeca},
title = {Testing VIPV Curved Modules: Methods and Challenges},
journal = {Progress in Photovoltaics: Research and Applications},
year = {2026},
volume = {34},
number = {6},
pages = {744--757},
doi = {10.1002/pip.70099}
}
EUVIMED