EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Silver‐Alloyed Wide‐Bandgap (Ag,Cu)(In,Ga)S 2 Thin‐Film Solar Cells With 15.5% Efficiency

Yucheng Hu, Ece Washbrook, Arivazhagan Valluvar Oli, Andrea Griesi, Yurii P. Ivanov, Mariam Pelling, Simon M. Fairclough, Kulwinder Kaur, Michele Melchiorre, Adam Hultqvist, Tobias Törndahl, Wolfram Hempel und 5 weitere

Progress in Photovoltaics: Research and Applications · 2026-07 · 34 (7) · 942-956

DOI: 10.1002/pip.70097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 22.03.2026. Verfasst von Yucheng Hu und 16 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Department of Forestry and Natural Resources, Purdue University, European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sulfide chalcopyrite Cu(In,Ga)S 2 (CIGS) is a wide‐bandgap semiconductor suitable for the top cell of a tandem solar device. Here, we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S 2 (ACIGS) absorbers. We report the Ag alloying effect on compositional, structural, and optoelectronic properties of absorbers. We demonstrate suppressed bulk recombination and improved carrier lifetime in ACIGS, as a result of improved grain size, porosity reduction, and defect passivation. We also show that Ag alloying flattens the Ga gradient. Consideration of this impact of Ag will be necessary in future engineering of the Ga profile to maximize charge carrier collection and avoid interface recombination. Exploiting the beneficial effects of Ag alloying, we report a wide‐bandgap (1.58 eV) ACIGS solar cell with a high power conversion efficiency of 15.5% and a large open‐circuit voltage ( V OC ) of 948 mV, improving on the reference pure CIGS solar cell, with an 11.2% efficiency and an 821 mV V OC . Ag alloying is a useful route to further increase the efficiency of CIGS solar cells and future tandem devices.

Förderung

  • Engineering and Physical Sciences Research Council
  • Department of Forestry and Natural Resources, Purdue University
  • European Commission

Zitieren

APA

Hu, Y., Washbrook, E., Oli, A. V., Griesi, A., Ivanov, Y. P., Pelling, M., Fairclough, S. M., Kaur, K., Melchiorre, M., Hultqvist, A., Törndahl, T., Hempel, W., Witte, W., Divitini, G., Siebentritt, S., Oliver, R. A., & Kusch, G. (2026). Silver‐Alloyed Wide‐Bandgap (Ag,Cu)(In,Ga)S 2 Thin‐Film Solar Cells With 15.5% Efficiency. Progress in Photovoltaics: Research and Applications, 34(7), 942-956. https://doi.org/10.1002/pip.70097

Vancouver

Hu Y, Washbrook E, Oli AV, Griesi A, Ivanov YP, Pelling M, et al. Silver‐Alloyed Wide‐Bandgap (Ag,Cu)(In,Ga)S 2 Thin‐Film Solar Cells With 15.5% Efficiency. Progress in Photovoltaics: Research and Applications. 2026;34(7):942-956. doi:10.1002/pip.70097

BibTeX
@article{Hu2026,
  author = {Hu, Yucheng and Washbrook, Ece and Oli, Arivazhagan Valluvar and Griesi, Andrea and Ivanov, Yurii P. and Pelling, Mariam and Fairclough, Simon M. and Kaur, Kulwinder and Melchiorre, Michele and Hultqvist, Adam and Törndahl, Tobias and Hempel, Wolfram and Witte, Wolfram and Divitini, Giorgio and Siebentritt, Susanne and Oliver, Rachel A. and Kusch, Gunnar},
  title = {Silver‐Alloyed Wide‐Bandgap (Ag,Cu)(In,Ga)S 2 Thin‐Film Solar Cells With 15.5% Efficiency},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2026},
  volume = {34},
  number = {7},
  pages = {942--956},
  doi = {10.1002/pip.70097}
}
Kostenlos starten →