EUVIMEDEUVIMED entdecken
Crossref

Factors Influencing the Abrasion Damage to Antisoiling Coatings on Photovoltaic Modules

Sonali Bhaduri, Rohan Bajhal, Makrand Farkade, Sudhanshu Mallick, Narendra Shiradkar, Anil Kottantharayil

Progress in Photovoltaics: Research and Applications · 2026-07 · 34 (7) · 906-919

DOI: 10.1002/pip.70089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 13.03.2026. Verfasst von Sonali Bhaduri und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 18 Literaturangaben. Gefördert von: Ministry of New and Renewable Energy India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Soiling significantly reduces the performance of PV modules, and robotic cleaning is commonly used to mitigate dust in large PV plants. However, frequent cleaning can damage antireflective/antisoiling coatings. This paper examines factors affecting abrasion damage on four commercial hydrophobic coatings (A, B, C and D) using a cleaning cycles simulator that emulates real‐world conditions. Key findings include: (1) the presence of dust/soil during cleaning cycles decreases the coating life by 82×, compared to only‐clean cycles, thus acting as the most significant stressor that abrades the coated samples. (2) Cleaning the samples with a brush material that has higher hardness (1.3×), coated samples show 3× lesser coating life. (3) Microfibre cloth brush causes the least damage to the antisoiling coatings (compared to other brush materials), as it applies the smallest weight on the sample's surface. (4) Coated samples show reduced (3×) coating life when cleaned with the direction of brush rotation as ‘towards the direction of travel,’ compared to ‘opposite to the direction of travel’ and ‘clockwise rotation.’ When the brush rotates towards the direction of travel, greater abrasion damage is seen due to the combined effect of dust particles (being dragged along with the brush) and brush bristles. (5) Reducing the horizontal velocity of brush travel by four times from 0.4 to 0.1 m/s results in a 3× decrease in coating life. PV developers and robotic cleaning manufacturers should optimize these variables to minimize damage to the top coatings applied on PV modules.

Förderung

  • Ministry of New and Renewable Energy India

Zitieren

APA

Bhaduri, S., Bajhal, R., Farkade, M., Mallick, S., Shiradkar, N., & Kottantharayil, A. (2026). Factors Influencing the Abrasion Damage to Antisoiling Coatings on Photovoltaic Modules. Progress in Photovoltaics: Research and Applications, 34(7), 906-919. https://doi.org/10.1002/pip.70089

Vancouver

Bhaduri S, Bajhal R, Farkade M, Mallick S, Shiradkar N, Kottantharayil A. Factors Influencing the Abrasion Damage to Antisoiling Coatings on Photovoltaic Modules. Progress in Photovoltaics: Research and Applications. 2026;34(7):906-919. doi:10.1002/pip.70089

BibTeX
@article{Bhaduri2026,
  author = {Bhaduri, Sonali and Bajhal, Rohan and Farkade, Makrand and Mallick, Sudhanshu and Shiradkar, Narendra and Kottantharayil, Anil},
  title = {Factors Influencing the Abrasion Damage to Antisoiling Coatings on Photovoltaic Modules},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2026},
  volume = {34},
  number = {7},
  pages = {906--919},
  doi = {10.1002/pip.70089}
}
Kostenlos starten →