EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Unveiling the mechanism of attaining high fill factor in silicon solar cells

Hao Lin, Genshun Wang, Qiao Su, Can Han, Chaowei Xue, Shi Yin, Liang Fang, Xixiang Xu, Pingqi Gao

Progress in Photovoltaics: Research and Applications · 2024-06 · 32 (6) · 359-371

DOI: 10.1002/pip.3775 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 25.01.2024. Verfasst von Hao Lin und 8 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province, National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A world record conversion efficiency of 26.81% has been achieved recently by LONGi team on a solar cell with industry‐grade silicon wafer (274 cm 2 , M6 size). An unparalleled high fill factor ( FF ) of up to 86.59% has also been certified in a separated device. The theoretical FF limit has been predicted to be 89.26%, while the practical FF is far below this limit for a prolonged interval due to the constraints of recombination (i.e., SRH recombination) and series resistance. The ideality factor ( m ) in the equivalent circuit of silicon solar cells is consistently ranging from 1 to 2 and rarely falls below 1, resulting in a relatively lower FF than 85%. Here, this work complements a systematic simulation study to demonstrate how to approach the FF limit in design of silicon solar cells. Firstly, a diode component with an ideality factor equal to 2/3 corresponding to Auger recombination is incorporated in the equivalent circuit for LONGi ultra‐high FF solar cell; Secondly, an advanced equivalent circuit is put forward for comprehensive analysis of bulk recombination and surface recombination on the performance, in which specific ideality factors are directly correlated with various recombination mechanisms exhibiting explicit reverse saturation current density ( J 0 ). Finally, we evaluate precisely the route for approaching theoretical FF in practical solar cell fabrication based on electrical design parameters using the developed model.

Förderung

  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Shenzhen Fundamental Research Program

Zitieren

APA

Lin, H., Wang, G., Su, Q., Han, C., Xue, C., Yin, S., Fang, L., Xu, X., & Gao, P. (2024). Unveiling the mechanism of attaining high fill factor in silicon solar cells. Progress in Photovoltaics: Research and Applications, 32(6), 359-371. https://doi.org/10.1002/pip.3775

Vancouver

Lin H, Wang G, Su Q, Han C, Xue C, Yin S, et al. Unveiling the mechanism of attaining high fill factor in silicon solar cells. Progress in Photovoltaics: Research and Applications. 2024;32(6):359-371. doi:10.1002/pip.3775

BibTeX
@article{Lin2024,
  author = {Lin, Hao and Wang, Genshun and Su, Qiao and Han, Can and Xue, Chaowei and Yin, Shi and Fang, Liang and Xu, Xixiang and Gao, Pingqi},
  title = {Unveiling the mechanism of attaining high fill factor in silicon solar cells},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2024},
  volume = {32},
  number = {6},
  pages = {359--371},
  doi = {10.1002/pip.3775}
}
Kostenlos starten →