EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Post‐deposition annealing and interfacial atomic layer deposition buffer layers of Sb 2 Se 3 /CdS stacks for reduced interface recombination and increased open‐circuit voltages

Thomas Paul Weiss, Ignacio Minguez‐Bacho, Elena Zuccalà, Michele Melchiorre, Nathalie Valle, Brahime El Adib, Tadahiro Yokosawa, Erdmann Spiecker, Julien Bachmann, Phillip J. Dale, Susanne Siebentritt

Progress in Photovoltaics: Research and Applications · 2023-03 · 31 (3) · 203-219

DOI: 10.1002/pip.3625 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 30.09.2022. Verfasst von Thomas Paul Weiss und 10 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Currently, Sb 2 Se 3 thin films receive considerable research interest as a solar cell absorber material. When completed into a device stack, the major bottleneck for further device improvement is the open‐circuit voltage, which is the focus of the work presented here. Polycrystalline thin‐film Sb 2 Se 3 absorbers and solar cells are prepared in substrate configuration and the dominant recombination path is studied using photoluminescence spectroscopy and temperature‐dependent current–voltage characteristics. It is found that a post‐deposition annealing after the CdS buffer layer deposition can effectively remove interface recombination since the activation energy of the dominant recombination path becomes equal to the bandgap of the Sb 2 Se 3 absorber. The increased activation energy is accompanied by an increased photoluminescence yield, that is, reduced non‐radiative recombination. Finished Sb 2 Se 3 solar cell devices reach open‐circuit voltages as high as 485 mV. Contrarily, the short‐circuit current density of these devices is limiting the efficiency after the post‐deposition annealing. It is shown that atomic layer‐deposited intermediate buffer layers such as TiO 2 or Sb 2 S 3 can pave the way for overcoming this limitation.

Zitieren

APA

Weiss, T. P., Minguez‐Bacho, I., Zuccalà, E., Melchiorre, M., Valle, N., Adib, B. E., Yokosawa, T., Spiecker, E., Bachmann, J., Dale, P. J., & Siebentritt, S. (2023). Post‐deposition annealing and interfacial atomic layer deposition buffer layers of Sb 2 Se 3 /CdS stacks for reduced interface recombination and increased open‐circuit voltages. Progress in Photovoltaics: Research and Applications, 31(3), 203-219. https://doi.org/10.1002/pip.3625

Vancouver

Weiss TP, Minguez‐Bacho I, Zuccalà E, Melchiorre M, Valle N, Adib BE, et al. Post‐deposition annealing and interfacial atomic layer deposition buffer layers of Sb 2 Se 3 /CdS stacks for reduced interface recombination and increased open‐circuit voltages. Progress in Photovoltaics: Research and Applications. 2023;31(3):203-219. doi:10.1002/pip.3625

BibTeX
@article{Weiss2023,
  author = {Weiss, Thomas Paul and Minguez‐Bacho, Ignacio and Zuccalà, Elena and Melchiorre, Michele and Valle, Nathalie and Adib, Brahime El and Yokosawa, Tadahiro and Spiecker, Erdmann and Bachmann, Julien and Dale, Phillip J. and Siebentritt, Susanne},
  title = {Post‐deposition annealing and interfacial atomic layer deposition buffer layers of Sb 2 Se 3 /CdS stacks for reduced interface recombination and increased open‐circuit voltages},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2023},
  volume = {31},
  number = {3},
  pages = {203--219},
  doi = {10.1002/pip.3625}
}
Kostenlos starten →