EUVIMEDEUVIMED entdecken
Crossref

3D printed stamps for footwear and leather goods production

Pedro Gonçalo Pereira Duarte, Margarida Pereira Moutinho Cavaco Mata, Carla Florbela Ferreira Pinto da Silva

Polymer International · 09.04.2026

DOI: 10.1002/pi.70126 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer International, online erschienen am 09.04.2026. Verfasst von Pedro Gonçalo Pereira Duarte und 2 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Gefördert von: Agência Nacional de Inovação.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of 3D printed stamps at an industrial scale for footwear and leather goods production was assessed by comparing three additive manufacturing (AM) technologies: selective laser sintering (SLS), masked stereolithography (mSLA) and fused filament fabrication (FFF). A benchmarking stamp was developed with design features of various dimensions, regularly used for applications in leather marking. The stamping process was also evaluated in terms of the duration of the stamping, number of cycles and stamp temperature. Both the stamping process and the AM technologies were assessed for two different types of leather: chrome and vegetable tanned leather, in wet and dry conditions. The results show that both SLS and mSLA allow the production of stamps with thinner design details and better definition than those produced by FFF. Design features with dimensions

Förderung

  • Agência Nacional de Inovação

Zitieren

APA

Duarte, P. G. P., Mata, M. P. M. C., & Silva, C. F. F. P. D. (2026). 3D printed stamps for footwear and leather goods production. Polymer International. https://doi.org/10.1002/pi.70126

Vancouver

Duarte PGP, Mata MPMC, Silva CFFPD. 3D printed stamps for footwear and leather goods production. Polymer International. 2026. doi:10.1002/pi.70126

BibTeX
@article{Duarte2026,
  author = {Duarte, Pedro Gonçalo Pereira and Mata, Margarida Pereira Moutinho Cavaco and Silva, Carla Florbela Ferreira Pinto da},
  title = {3D printed stamps for footwear and leather goods production},
  journal = {Polymer International},
  year = {2026},
  doi = {10.1002/pi.70126}
}
Kostenlos starten →